How to remove the antenna cable on 2009 Toyota Venza?

Starting the procedure requires removal of the instrument panel safety pad assembly. After disconnecting seven clamps you can take away the Number 1 antenna cord sub-assembly. Complete the removal process by taking off the roof headlining assembly. Remove the rear No. 2 washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly through strips of tape access on vehicles without sliding roofs while keeping as much tape available for later reuse. Users of vehicles with sliding roofs must perform the same sequence to eliminate the rear No. 2 washer hose together with the No. 2 antenna cord sub-assembly. Proceed by removing the upper back window panel trim together with the back door panel trim assembly and back door trim covers from both sides of the vehicle based on the power back door configuration. Removal of the screw allows you to disconnect the rear seat lock control lever sub-assembly. To eliminate the satellite radio antenna cord the technician disconnectes two connectors while dislodging all six clamps. Vehicle owners without satellite radio must first disconnect 2 connectors from the No. 3 antenna cord sub-assembly and proceed to disengage 4 hooks along with disconnecting the washer hose before disengaging 7 clamps. To perform the removal of a vehicle with satellite radio requires the disconnection of three connectors and the disengagement of four hooks as well as washer hose detachment and eight clamps release. The connector on the radio antenna amplifier needs to be detached first before breaking free the 4 clamps and removing the grommet from the back door using 2 claws to take out the No. 3 antenna cord sub-assembly along with the washer hose.

OEM 2009 Toyota Venza Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Antenna Cables found

View related parts
2009 Toyota Venza Antenna Cable, Rear
Part Number: 86101-0T011
$159.89 MSRP: $226.35
You Save: $66.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
- Part Name Code: 86101D
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.8 x 7.7 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-0T011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Antenna Cable, Front
Part Number: 86101-0T020
$143.88 MSRP: $203.68
You Save: $59.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
- Part Name Code: 86101J
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.6 x 7.8 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-0T020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Antenna Cable, Rear
Part Number: 86101-0T090
$152.21 MSRP: $215.46
You Save: $63.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
- Part Name Code: 86101D
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.4 x 7.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-0T090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Antenna Cable
Part Number: 86101-0T050
$130.95 MSRP: $185.38
You Save: $54.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Part Name Code: 86101
- Item Weight: 1.10 Pounds
- Item Dimensions: 16.0 x 6.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-0T050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Antenna Cable, Front
Part Number: 86101-0T030
$138.96 MSRP: $196.70
You Save: $57.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
- Part Name Code: 86101J
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.4 x 7.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-0T030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Antenna Cable
Part Number: 86101-0T060
$117.77 MSRP: $165.30
You Save: $47.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Manufacturer Note: AUDIO-6CD CHANGER,13SPEAKER,BLUETOOTH&EMV & NAVIGATION SYSTEM-WITH
- Part Name Code: 86101
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.4 x 6.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-0T060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Venza Antenna Cable

Looking for affordable OEM 2009 Toyota Venza Antenna Cable? Explore our comprehensive catalogue of genuine 2009 Toyota Venza Antenna Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Venza Parts Questions & Experts Answers

Q: How to remove the antenna cable on 2009 Toyota Venza?
A: Starting the procedure requires removal of the instrument panel safety pad assembly. After disconnecting seven clamps you can take away the Number 1 antenna cord sub-assembly. Complete the removal process by taking off the roof headlining assembly. Remove the rear No. 2 washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly through strips of tape access on vehicles without sliding roofs while keeping as much tape available for later reuse. Users of vehicles with sliding roofs must perform the same sequence to eliminate the rear No. 2 washer hose together with the No. 2 antenna cord sub-assembly. Proceed by removing the upper back window panel trim together with the back door panel trim assembly and back door trim covers from both sides of the vehicle based on the power back door configuration. Removal of the screw allows you to disconnect the rear seat lock control lever sub-assembly. To eliminate the satellite radio antenna cord the technician disconnectes two connectors while dislodging all six clamps. Vehicle owners without satellite radio must first disconnect 2 connectors from the No. 3 antenna cord sub-assembly and proceed to disengage 4 hooks along with disconnecting the washer hose before disengaging 7 clamps. To perform the removal of a vehicle with satellite radio requires the disconnection of three connectors and the disengagement of four hooks as well as washer hose detachment and eight clamps release. The connector on the radio antenna amplifier needs to be detached first before breaking free the 4 clamps and removing the grommet from the back door using 2 claws to take out the No. 3 antenna cord sub-assembly along with the washer hose.