How to install the No. 3 antenna cable sub-assembly on Toyota Venza?

When fitting the No. 3 antenna cord sub-assembly use the rear No. 2 washer hose to thread it through the assembly then through the vehicle body until you securely engage the 2 claws which brings the grommet into place at the back door. Subsequently attach all 4 clamps. The installation of the rear No. 2 washer hose requires 4 hooks for vehicles without Satellite Radio and includes the 2 connectors while vehicles with Satellite Radio require 3 connectors and proper positioning of the grommet which faces outside the vehicle. After this step engage the 6 clamps to install the satellite radio antenna cord while connecting the 2 connectors. Begin by screwing in the rear seat lock control lever sub-assembly and complete the installation with window panel trim and the back door panel trim assembly then the back door trim covers (RH and LH with or without Power Back Door). To install the No. 2 antenna cord sub-assembly join it with the rear No. 2 washer hose to the roof headlining assembly markers and secure it with tape while temporarily installed. Use packing tape when needed. The last step involves roof headlining assembly setup then 7 clamp installation to place the No. 1 antenna cord sub-assembly and final installation of the instrument panel safety pad assembly.

How to remove the antenna cable on Toyota Venza?

Starting the procedure requires removal of the instrument panel safety pad assembly. After disconnecting seven clamps you can take away the Number 1 antenna cord sub-assembly. Complete the removal process by taking off the roof headlining assembly. Remove the rear No. 2 washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly through strips of tape access on vehicles without sliding roofs while keeping as much tape available for later reuse. Users of vehicles with sliding roofs must perform the same sequence to eliminate the rear No. 2 washer hose together with the No. 2 antenna cord sub-assembly. Proceed by removing the upper back window panel trim together with the back door panel trim assembly and back door trim covers from both sides of the vehicle based on the power back door configuration. Removal of the screw allows you to disconnect the rear seat lock control lever sub-assembly. To eliminate the satellite radio antenna cord the technician disconnectes two connectors while dislodging all six clamps. Vehicle owners without satellite radio must first disconnect 2 connectors from the No. 3 antenna cord sub-assembly and proceed to disengage 4 hooks along with disconnecting the washer hose before disengaging 7 clamps. To perform the removal of a vehicle with satellite radio requires the disconnection of three connectors and the disengagement of four hooks as well as washer hose detachment and eight clamps release. The connector on the radio antenna amplifier needs to be detached first before breaking free the 4 clamps and removing the grommet from the back door using 2 claws to take out the No. 3 antenna cord sub-assembly along with the washer hose.

OEM Toyota Venza Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Antenna Cables found

View related parts
Toyota Venza Antenna Cable
Part Number: 86101-4DL70
$137.46 MSRP: $194.60
You Save: $57.14 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable
Part Number: 86101-4DL10
$137.40 MSRP: $194.52
You Save: $57.12 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable, Front
Part Number: 86101-4D320
$161.79 MSRP: $229.03
You Save: $67.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable, Front
Part Number: 86101-4D310
$145.45 MSRP: $205.91
You Save: $60.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Venza | LE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable, Center
Part Number: 86101-4D180
$154.05 MSRP: $218.08
You Save: $64.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable
Part Number: 86101-0T110
$116.20 MSRP: $163.11
You Save: $46.91 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2014 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable, Front
Part Number: 86101-0T020
$143.88 MSRP: $203.68
You Save: $59.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2012 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable
Part Number: 86101-4DM20
$94.47 MSRP: $132.60
You Save: $38.13 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable, Rear
Part Number: 86101-4D170
$94.55 MSRP: $132.72
You Save: $38.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable, Rear
Part Number: 86101-4D110
$105.69 MSRP: $148.35
You Save: $42.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear; Antenna
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable
Part Number: 86101-48Z40
$94.47 MSRP: $132.60
You Save: $38.13 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Antenna Cable
Part Number: 86101-0T140
$116.20 MSRP: $163.11
You Save: $46.91 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable, Front
Part Number: 86101-0T120
$125.70 MSRP: $177.94
You Save: $52.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable
Part Number: 86101-0T100
$104.40 MSRP: $146.53
You Save: $42.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable, Rear
Part Number: 86101-0T090
$152.21 MSRP: $215.46
You Save: $63.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable
Part Number: 86101-0T060
$117.77 MSRP: $165.30
You Save: $47.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Manufacturer Note: AUDIO-6CD CHANGER,13SPEAKER,BLUETOOTH&EMV & NAVIGATION SYSTEM-WITH
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2012 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable
Part Number: 86101-0T050
$131.00 MSRP: $185.45
You Save: $54.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2012 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable, Front
Part Number: 86101-0T030
$138.99 MSRP: $196.76
You Save: $57.77 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Antenna Cable, Rear
Part Number: 86101-0T011
$159.91 MSRP: $226.36
You Save: $66.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Venza Antenna Cable

Choose genuine Antenna Cable that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Antenna Cable for your Toyota Venza? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Venza Antenna Cable Parts and Q&A

Antenna Cable, Rear
86101-0T011
Q: How to install the No. 3 antenna cable sub-assembly on Toyota Venza?
A:
When fitting the No. 3 antenna cord sub-assembly use the rear No. 2 washer hose to thread it through the assembly then through the vehicle body until you securely engage the 2 claws which brings the grommet into place at the back door. Subsequently attach all 4 clamps. The installation of the rear No. 2 washer hose requires 4 hooks for vehicles without Satellite Radio and includes the 2 connectors while vehicles with Satellite Radio require 3 connectors and proper positioning of the grommet which faces outside the vehicle. After this step engage the 6 clamps to install the satellite radio antenna cord while connecting the 2 connectors. Begin by screwing in the rear seat lock control lever sub-assembly and complete the installation with window panel trim and the back door panel trim assembly then the back door trim covers (RH and LH with or without Power Back Door). To install the No. 2 antenna cord sub-assembly join it with the rear No. 2 washer hose to the roof headlining assembly markers and secure it with tape while temporarily installed. Use packing tape when needed. The last step involves roof headlining assembly setup then 7 clamp installation to place the No. 1 antenna cord sub-assembly and final installation of the instrument panel safety pad assembly.
Antenna Cable, Front
86101-0T020
Q: How to remove the antenna cable on Toyota Venza?
A:
Starting the procedure requires removal of the instrument panel safety pad assembly. After disconnecting seven clamps you can take away the Number 1 antenna cord sub-assembly. Complete the removal process by taking off the roof headlining assembly. Remove the rear No. 2 washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly through strips of tape access on vehicles without sliding roofs while keeping as much tape available for later reuse. Users of vehicles with sliding roofs must perform the same sequence to eliminate the rear No. 2 washer hose together with the No. 2 antenna cord sub-assembly. Proceed by removing the upper back window panel trim together with the back door panel trim assembly and back door trim covers from both sides of the vehicle based on the power back door configuration. Removal of the screw allows you to disconnect the rear seat lock control lever sub-assembly. To eliminate the satellite radio antenna cord the technician disconnectes two connectors while dislodging all six clamps. Vehicle owners without satellite radio must first disconnect 2 connectors from the No. 3 antenna cord sub-assembly and proceed to disengage 4 hooks along with disconnecting the washer hose before disengaging 7 clamps. To perform the removal of a vehicle with satellite radio requires the disconnection of three connectors and the disengagement of four hooks as well as washer hose detachment and eight clamps release. The connector on the radio antenna amplifier needs to be detached first before breaking free the 4 clamps and removing the grommet from the back door using 2 claws to take out the No. 3 antenna cord sub-assembly along with the washer hose.

Related Toyota Venza Parts

Browse Toyota Venza Antenna Cable by Years

2023 2022 2021 2015 2014 2013 2012 2011 2010 2009