Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Item Weight: 0.70 Pounds
Item Dimensions: 4.8 x 3.0 x 2.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-09100
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Front Right; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
Position: Passenger Side
Part Name Code: 89860
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 2.5 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89860-08021
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 2.6 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89833-08011
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Sensor, Seat Position; Air Bag Seat Sensor Mat, Front Left; Seat Track Position Sensor, Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
Position: Driver Side
Replaces: 89178-33030
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.1 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33031
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front Left; Air Bag Seat Sensor Mat, Front Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
Position: Front Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.2 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
2009 Toyota Sienna Air Bag Sensor
Looking for affordable OEM 2009 Toyota Sienna Air Bag Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Sienna Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Sienna Air Bag Sensor Parts Q&A
Q: How to install the side Air Bag sensor LH on 2009 Toyota Sienna?
A: You should install the side Air Bag sensor LH only when the ignition switch is off and battery negative terminal disconnected. The installation must take place at least 90 seconds after disconnection. Connect the side Air Bag sensor LH by using 2 nuts to achieve a torque setting of 17.5 Nm (179 kgf-cm, 13 ft-lbf). The side Air Bag sensor LH needs replacement with a new unit if it has experienced drops or indicates any damage through cracks and dents or defects. The SRS wiring should never contact other vehicle parts and must remain free of pinching during installation as well as any loose installation parts should be checked. Use the wire connector to link with the side Air Bag sensor LH. The sequence of installation includes the front seat outer belt assembly followed by the center pillar garnish lower LH, lap belt outer anchor cover LH, rear door Weather Strip LH, front door opening trim Weather Strip LH, front door scuff plate LH, and finally the rear door scuff plate LH. Connect the cable to the negative battery terminal followed by system initialization according to requirement before inspecting the SRS warning light for correct operation.