OEM 2009 Toyota Sienna Antenna

2009 Toyota Sienna Antenna Parts Q&A

• Q: How to install the navigation antenna assembly and its related components on 2009 Toyota Sienna?

  A: The installation process begins with insuring the instrument panel safety pad sub-assembly is secured using a torque wrench on bolt [B] at 20 Nm (204 kgf-cm, 14ft-lbf). Tighten the 4 bolts of the shift lever assembly to 21 Nm (214 kgf-cm, 12.6ft-lbf). The installation order includes defroster nozzle opening plate No.1 followed by front speaker assemblies No.1 and No.2. Next proceed with the instrument panel speaker panel sub-assembly No.2 followed by the instrument panel speaker panel sub-assembly installation. The next steps involve installing the front pillar garnish RH and LH together with the integration control & panel assembly and the navigation receiver assembly. As a next step install the stereo component speaker assembly before moving onto the instrument cluster finish panel garnish then the instrument cluster finish panel sub-assembly lower center followed by the instrument cluster finish panel assembly center. Place in order the floor shift position indicator housing assembly alongside the shift lever knob sub-assembly and also the instrument cluster finish panel center No.2 and No.1. The floor carpet covers center position along with both RH and LH sides must be installed together with the instrument panel register assemblies No.3 then No.1 followed by instrument side panels for RH and LH positions and instrument panel box No.2, glove compartment door assembly and glove compartment door stopper sub-assembly must be installed last. After installing the instrument panel safety pad insert sub-assembly No.1 proceed with installing the instrument panel finish panel sub-assembly lower LH and cowl side trim board RH and LH together with front door scuff plate RH and LH and the combination meter assembly. Install the units that include the instrument cluster finish panel sub-assembly, windshield wiper switch assembly, headlight dimmer switch assembly, spiral cable sub-assembly and steering column cover. The technician must adjust the spiral cable sub-assembly before installing the steering wheel assembly and horn button assembly while adding the steering wheel cover lower No.2 and No.3 to the vehicle. The completion process includes connecting the battery negative terminal while checking both the horn button assembly and the SRS warning light.