How to remove the TPMS Sensor and Transmitter on 2009 Toyota Sienna?

Begin the removal of Tire Pressure Warning Valve and Transmitter by taking out the front as well as rear wheels. To drop the tire pressure warning valve and transmitter first free the tire air by unscrewing the valve core and cap before removing the nut and washer to let the device fall inside the tire chamber. Safeguard the valve core and nut along with the washer after removing them. Lower the valve and transmitter into the tire as you disconnect the valve using the tire remover device shoe but maintain safety by avoiding damage caused by the tire bead. Use normal bead removal procedures on the top of the tire and extract the tire pressure warning valve and transmitter after which repeat the same procedure on the lower side of the tire for bead removal. When replacing the tire pressure warning valve and transmitter maintain proper usage of fresh grommets and washers.

OEM 2009 Toyota Sienna TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 TPMS Sensors found

View related parts
2009 Toyota Sienna Tire Pressure Sensor, Driver Side
Part Number: 84746-AE010
$64.62 MSRP: $90.71
You Save: $26.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Tire Pressure; TPMS Reset Switch; TPMS Sensor Service Kit; Pressure Switch; Warning Switch; Switch; Receiver; Indicator; Switch, Tire Pressure Warning
- Position: Driver Side
- Replaces: 84746-50010, 84746-48010
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84746-AE010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- Base, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Limited, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Sienna TPMS Sensor
Part Number: 42607-0C070
$59.20 MSRP: $82.40
You Save: $23.20 (29%)
Product Specifications
- Other Name: Valve Sub-Assembly, Tire; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Sensor; Valve Sub-Assembly, Tire Pressure Monitor
- Replaces: 42607-0C030, 42607-0C050, PT586-3408B, 42607-08010
- Part Name Code: 42607
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.9 x 3.0 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 42607-0C070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- Base, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Sienna TPMS Sensor

Looking for affordable OEM 2009 Toyota Sienna TPMS Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Sienna TPMS Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sienna Parts Questions & Experts Answers

Q: How to remove the TPMS Sensor and Transmitter on 2009 Toyota Sienna?
A: Begin the removal of Tire Pressure Warning Valve and Transmitter by taking out the front as well as rear wheels. To drop the tire pressure warning valve and transmitter first free the tire air by unscrewing the valve core and cap before removing the nut and washer to let the device fall inside the tire chamber. Safeguard the valve core and nut along with the washer after removing them. Lower the valve and transmitter into the tire as you disconnect the valve using the tire remover device shoe but maintain safety by avoiding damage caused by the tire bead. Use normal bead removal procedures on the top of the tire and extract the tire pressure warning valve and transmitter after which repeat the same procedure on the lower side of the tire for bead removal. When replacing the tire pressure warning valve and transmitter maintain proper usage of fresh grommets and washers.