OEM 2009 Toyota RAV4 Washer Pump

2009 Toyota RAV4 Washer Pump Parts Q&A

• Q: How to remove the windshield washer pump on 2009 Toyota RAV4?

  A: One must disconnect the negative cable from the battery before waiting at least ninety seconds to disable SRS system operation. The washer inlet sub-assembly needs extraction by first removing the clip then lifting the washer inlet upward off the windshield washer jar and pump assembly. The first step involves using a screwdriver to remove the clip and fender liner retainer from the left-hand side front fender liner while also removing the screw, nut, and bolt. Owners with diffusers should additionally detach the front fender splash front shield LH before partially taking out the fender liner from its mounting position. Repetitive steps should be used when removing the right-hand side fender liner. Begin by removing the radiator support opening cover and proceed to uninstall the front bumper cover according to standard procedures that depend on whether it comes with an under guard. The washer fluid drainage process requires disconnection of the washer hoses from the windshield washer motor and pump assembly and placement of the fluid into a container. The three clamps should be detached while disconnecting the three connectors attached to the windshield washer jar assembly after which the two washer hoses and three screws need removal to extract the washer jar and pump. Finally remove the windshield washer motor and pump assembly from its packing in the washer jar followed by extracts of the rear washer motor and pump assembly.