Other Name: Blade, Rear Wiper; Back Glass Wiper Blade; Rear Blade; Blade Assembly, Rear Wiper
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 14.7 x 1.9 x 0.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85242-02040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
Adventure, Base, Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE, L, LE, Limited, Sport, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
2009 Toyota RAV4 Wiper Blade
Looking for affordable OEM 2009 Toyota RAV4 Wiper Blade? Explore our comprehensive catalogue of genuine 2009 Toyota RAV4 Wiper Blade. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota RAV4 Parts Questions & Experts Answers
Q: How to remove the rear wiper blade assembly on 2009 Toyota RAV4?
A: The rear wiper blade assembly can be extracted by following the removal procedures to remove the cap then raise both the arm and blade. You should position the wiper blade to listen for the "click" sound when the claw detachment happens while avoiding any claw damage. The proper procedure to detach the wiper blade requires pulling it straight toward the left vehicle side while staying away from folding the wiper arm to protect the back door glass surface from damage. The wiper rubber removal for the rear requires lifting along the blade stopper until you reach its end point while being watchful to avoid excessive force to keep the backing plates and blade claws intact. Pressing slightly on the rubber segment between the ends will simplify its removal process.