Other Name: Motor&Pump Assembly, F; Windshield Washer Pump; Washer Pump Repair Kit; Motor & Pump Assembly; Front Pump; Front Washer Pump; Rear Washer Pump; Motor And Pump Assembly, Windshield Washer
Part Name Code: 85310
Item Weight: 0.60 Pounds
Item Dimensions: 13.8 x 12.0 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85330-60190
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
Base, L, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Motor&Pump Assembly, F; Back Glass Washer Pump; Washer Pump Repair Kit; Windshield Washer Pump; Rear Pump; Rear Washer Pump; Motor & Pump Assembly, Rear Washer; Motor Assembly, Rear Washer
Item Weight: 0.60 Pounds
Item Dimensions: 14.0 x 12.2 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85330-60180
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
Base, L, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
2008 Toyota RAV4 Washer Pump
Looking for affordable OEM 2008 Toyota RAV4 Washer Pump? Explore our comprehensive catalogue of genuine 2008 Toyota RAV4 Washer Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota RAV4 Washer Pump Parts Q&A
Q: How to install the windshield Washer Pump assembly on 2008 Toyota RAV4?
A: Begin by fixing the rear washer motor and pump to the washer jar packing. The windshield washer motor together with pump should be installed onto the washer jar packing. You can install the windshield washer jar and pump assembly using 3 bolts while you connect its connectors. Add washer fluid to the washer jar and pump assembly through the attachment of washer motor and pump to washer hoses. The next step requires the installation of the front bumper cover followed by the radiator support opening cover before attaching the front fender liner LH and RH. Install the washer inlet subassembly by uniting the washer inlet to the windshield washer jar and pump and using the clip for attachment and then wiring the negative battery terminal.