Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
Position: Rear
Part Name Code: 48812
Item Weight: 5.30 Pounds
Item Dimensions: 41.1 x 9.3 x 3.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48812-35120
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
2009 Toyota FJ Cruiser Sway Bar Kit
Looking for affordable OEM 2009 Toyota FJ Cruiser Sway Bar Kit? Explore our comprehensive catalogue of genuine 2009 Toyota FJ Cruiser Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota FJ Cruiser Sway Bar Kit Parts Q&A
Q: How to remove the front Sway Bar Kit on 2009 Toyota FJ Cruiser?
A: The procedure to remove the front sway bar kit starts with removing both front wheels followed by the engine under cover sub-assembly. Proceed to remove the left-hand side front sway bar link assembly by disconnecting its 2 nuts and sway bar link; if the ball joint turns with the nut use a 6 mm hexagon wrench to stabilize the stud. The right-hand side removal process matches the same protocol as the left-hand side process. Follow it up by taking out 4 bolts and 2 sway bar brackets to detach the front sway bar kit. The sway bar kit needs its final installation step which is the removal of the 2 bushes attached to it.