Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
Position: Passenger Side
Replaces: 48610-60050
Part Name Code: 48610
Item Weight: 5.70 Pounds
Item Dimensions: 18.3 x 6.8 x 14.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48610-60070
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
Position: Lower Driver Side
Part Name Code: 48069
Item Weight: 42.40 Pounds
Item Dimensions: 21.0 x 16.6 x 18.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48069-60010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm
Position: Passenger Side
Part Name Code: 48068
Item Weight: 43.20 Pounds
Item Dimensions: 19.2 x 3.5 x 18.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48068-60010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
2009 Toyota FJ Cruiser Control Arm
Looking for affordable OEM 2009 Toyota FJ Cruiser Control Arm? Explore our comprehensive catalogue of genuine 2009 Toyota FJ Cruiser Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota FJ Cruiser Control Arm Parts Questions & Experts Answers
Q: How to install the rear lower control arm on 2009 Toyota FJ Cruiser?
A: The procedure begins with installing the lower control arm according to the illustration and putting light tension on the bolt and nut with the washer. You must install and torque the parking brake cable onto the lower control arm at 13 Nm (127 kgf-cm, 9 ft-lbf). The installation of the rear wheel requires a torque which should measure 112 Nm (1,137 kgf-cm, 82 ft-lbf). The suspension needs stabilization through vehicle lowering followed by multiple bouncing motions to achieve stability. Finally tighten the two bolts to 130 Nm (1,326 kgf-cm, 96 ft-lbf) by turning and fixing the nut.