Other Name: Spring, Coil, Front; Coil Spring, Front Right; Coil Springs; Spring; Spring, Front Coil, Passenger Side
Position: Passenger Side
Replaces: 48131-35560
Part Name Code: 48131
Item Weight: 6.90 Pounds
Item Dimensions: 16.2 x 6.9 x 5.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48131-35561
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
2009 Toyota FJ Cruiser Coil Springs
Looking for affordable OEM 2009 Toyota FJ Cruiser Coil Springs? Explore our comprehensive catalogue of genuine 2009 Toyota FJ Cruiser Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota FJ Cruiser Coil Springs Parts Q&A
Q: How to remove and replace the coil springs on 2009 Toyota FJ Cruiser?
A: Install the coil spring onto the body so its lower end points towards the rear before securing the 3 nuts on top of the front shock absorber with coil spring at 64 Nm (653 kgf-cm, 47 ft-lbf). Tighten the bolt together with its nut and washer as per the provided illustration. Put on the tie rod end sub-assembly before adding the front stabilizer bar. First attach the left-hand front stabilizer link assembly to the steering knuckle through its nut before setting torque to 70 Nm (714 kgf-cm, 52 ft-lbf); when the ball joint moves with the nut usage requires a 6 mm hexagon wrench to secure the stud. The method of installing the right-hand side matches precisely with the left-hand procedure. Install the engine under cover sub-assembly and tighten the bolts to 29 Nm while completing the process by attaching the front wheels and tightening to 112 Nm. Stabilize the suspension through jacking up then bouncing down the vehicle multiple times. Tighten the front shock absorber nut that features the coil spring to 135 Nm (1,377 kgf-cm, 100 ft-lbf) while performing wheel alignment adjustment and inspection of the assembly.