Other Name: Multiple-Pnc; Suspension Shock Absorber Kit; Strut Assembly; Shock Absorber Set; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side
Item Weight: 6.20 Pounds
Item Dimensions: 26.9 x 8.4 x 7.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48510-09S50
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition | 6 Cyl 4.0 L GAS
2009 Toyota FJ Cruiser Shock Absorber
Looking for affordable OEM 2009 Toyota FJ Cruiser Shock Absorber? Explore our comprehensive catalogue of genuine 2009 Toyota FJ Cruiser Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota FJ Cruiser Shock Absorber Parts Q&A
Q: How to install the rear shock absorber on 2009 Toyota FJ Cruiser?
A: The first step to install the rear shock absorber involves pre-tightening it by securing the 3 cushion retainers, the No. 1 cushion, the No. 2 cushion and shock absorber with a new nut before using a bolt to secure the shock absorber while holding the piston rod and tightening the new nut to a torque of 25 Nm (255 kgf-cm, 18 ft-lbf). After installing the rear wheel you should torque it to 112 Nm (1,137 kgf-cm, 82 ft-lbf). To stabilize the suspension drivers should park the vehicle then lower it using jacks before performing multiple bounces. Complete tightening of the rear shock absorber bolt should reach 98 Nm (1,000 kgf-cm, 72 ft-lbf).