How to install the rear upper control arm on Toyota FJ Cruiser?

The first step to install the rear upper control arm requires installation and temporary tightening of the upper control arm along with the nut and washer and bolt. The suspension needs stabilization by jack down of the vehicle which requires multiple bouncing sessions prior to complete nut tightening. Wrap up the installation by completely tightening the two nuts to 80 Nm torque metric class (816 kgf-cm and 59 ft-lbf) while setting the nut motion and fastening the bolt.

How to remove and replace the front upper Control Arm on Toyota FJ Cruiser?

The first step involves wheel removal to allow inspection of the ball joint slack through manual arm shake motions on the upper suspension front arm. Start by disconnecting the skid control sensor wire through removal of its 2 bolts. A jack should support the lower arm for removal of a bolt and nut. The combination of Special Service Tool 09628-62011 and its removal procedure disconnects the upper ball joint from the steering knuckle then allows separation of the bracket with a bolt. The maintenance process ends by extracting the upper arm after removing the bolt together with its two washers and nut.

OEM Toyota FJ Cruiser Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arms found

View related parts
Toyota FJ Cruiser Arm Assembly, Front Suspension, Upper Driver Side
Part Number: 48630-60040
$285.06 MSRP: $407.00
You Save: $121.94 (30%)
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm; Control Arm
- Position: Upper Driver Side
- Replaces: 48630-60020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Upper Control Arm, Passenger Side
Part Number: 48610-60070
$285.06 MSRP: $407.00
You Save: $121.94 (30%)
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Replaces: 48610-60050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Lower Control Arm, Driver Side
Part Number: 48069-60040
$293.87 MSRP: $419.59
You Save: $125.72 (30%)
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Control Arm
- Position: Lower Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2014 Toyota FJ Cruiser | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Lower Control Arm, Passenger Side
Part Number: 48068-60040
$278.33 MSRP: $397.39
You Save: $119.06 (30%)
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Control Arm
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2014 Toyota FJ Cruiser | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Lower Control Arm, Driver Side
Part Number: 48069-60010
$341.34 MSRP: $500.24
You Save: $158.90 (32%)
Ships in 1-3 Business Days
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Arm Sub-Assembly, Front Suspension, Lower Passenger Side
Part Number: 48068-60010
$340.46 MSRP: $486.10
You Save: $145.64 (30%)
Ships in 1-3 Business Days
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS

Toyota FJ Cruiser Control Arm

Choose genuine Control Arm that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Control Arm for your Toyota FJ Cruiser? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota FJ Cruiser parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota FJ Cruiser Control Arm is an important part of the Cruiser especially as it helps in improving the reliability as well as performance of the car. Control Arm is used on the frame of the Toyota FJ Cruiser to connect it to the wheels; it enables the suspension system to move and adjust the wheels accordingly to the surface that is being traveled on. This is particularly crucial for wheel alignment of the Toyota FJ Cruiser, a factor that regulates the safety as well as maneuverability of the automobile. Even in the FJ Cruiser several models some manufacturers use conventional Control Arms known as A-arms while others use the MacPherson struts both of which affect the concentration and attitude of the car particularly on sports like terrain. This along with other components adds up to the major advantage of the Control Arm where it is manufactured from some of the most durable material like stamped steel or cast aluminum so as to withstand a long period of time in the automotive market. Also, it is applicable to several models of FJ Cruiser which makes it efficient and stable in all varieties. This enhances the vehicle's rigidity and the new bushing increases the maneuverability, thus making Toyota FJ Cruiser be recognized for its off-road performance as well as on-road comfort. Owing to its Individual design and functional enforcement, the Control Arm is a vital component in FJ Cruiser's suspension system for a comfortable drive and awesome performance. In general, the Toyota FJ Cruiser Control Arm stands for quality and performance characteristics of Toyota, which should attract the attention of every fan of the FJ Cruiser model.

Toyota FJ Cruiser Control Arm Parts and Q&A

Lower Control Arm, Driver Side
48069-60010
Q: How to install the rear upper control arm on Toyota FJ Cruiser?
A:
The first step to install the rear upper control arm requires installation and temporary tightening of the upper control arm along with the nut and washer and bolt. The suspension needs stabilization by jack down of the vehicle which requires multiple bouncing sessions prior to complete nut tightening. Wrap up the installation by completely tightening the two nuts to 80 Nm torque metric class (816 kgf-cm and 59 ft-lbf) while setting the nut motion and fastening the bolt.
Arm Assembly, Front Suspension, Upper Driver Side
48630-60040
Q: How to remove and replace the front upper Control Arm on Toyota FJ Cruiser?
A:
The first step involves wheel removal to allow inspection of the ball joint slack through manual arm shake motions on the upper suspension front arm. Start by disconnecting the skid control sensor wire through removal of its 2 bolts. A jack should support the lower arm for removal of a bolt and nut. The combination of Special Service Tool 09628-62011 and its removal procedure disconnects the upper ball joint from the steering knuckle then allows separation of the bracket with a bolt. The maintenance process ends by extracting the upper arm after removing the bolt together with its two washers and nut.