How to install a Yaw Sensor on 2009 Toyota Camry?

The BOSCH Made sensor requires 2 nuts for bracket attachment with 5.0 Nm torque setup (51 kgf-cm torques and 44 in-lb torque specification). Attach both yaw rate sensor and acceleration sensor with 2 bolts while paying attention to sensor protection and using 13 Nm (133 kgf-cm, 10 ft-lbf) torque. The installer must attach the yaw rate and acceleration sensor connector. Install the No. 1 console box duct followed by the console box assembly and console box carpet before adding the console box pocket and upper rear console panel sub-assembly which serves automatic and manual transaxles (for manual transaxle use upper console panel and floor shift position indicator housing sub-assembly and complete with No. 2 instrument cluster finish panel garnish and No. 1 instrument cluster finish panel garnish and shift lever knob sub-assembly that works for both manual and automatic transaxles. Finish the procedure by calibrating the yaw rate sensor zero point and inspecting the sensor signal between BOSCH and ADVICS systems.

OEM 2009 Toyota Camry Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Yaw Sensors found

View related parts
2009 Toyota Camry Yaw Rate Sensor
Part Number: 89183-06010
$379.24 MSRP: $477.39
You Save: $98.15 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Yawrate; Suspension Yaw Sensor; Yaw Sensor
- Manufacturer Note: VSC-WITH
- Part Name Code: 89183A
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.5 x 4.1 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89183-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Yaw Rate Sensor
Part Number: 89180-33050
$1264.86 MSRP: $1853.67
You Save: $588.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor; Sensor, Yawrate
- Manufacturer Note: W(VSC)
- Part Name Code: 89183A
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.6 x 4.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Yaw Rate Sensor
Part Number: 89180-33060
$538.68 MSRP: $789.45
You Save: $250.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor
- Part Name Code: 89180
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.5 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-33060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Camry Yaw Sensor

Looking for affordable OEM 2009 Toyota Camry Yaw Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Camry Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Parts Questions & Experts Answers

Q: How to install a Yaw Sensor on 2009 Toyota Camry?
A: The BOSCH Made sensor requires 2 nuts for bracket attachment with 5.0 Nm torque setup (51 kgf-cm torques and 44 in-lb torque specification). Attach both yaw rate sensor and acceleration sensor with 2 bolts while paying attention to sensor protection and using 13 Nm (133 kgf-cm, 10 ft-lbf) torque. The installer must attach the yaw rate and acceleration sensor connector. Install the No. 1 console box duct followed by the console box assembly and console box carpet before adding the console box pocket and upper rear console panel sub-assembly which serves automatic and manual transaxles (for manual transaxle use upper console panel and floor shift position indicator housing sub-assembly and complete with No. 2 instrument cluster finish panel garnish and No. 1 instrument cluster finish panel garnish and shift lever knob sub-assembly that works for both manual and automatic transaxles. Finish the procedure by calibrating the yaw rate sensor zero point and inspecting the sensor signal between BOSCH and ADVICS systems.