How to properly remove the Yaw Sensor on 2008 Toyota Camry?

Begin by taking off both automatic and manual transaxle shift lever knobs and then both No. 1 and No. 2 instrument cluster finish panel garnishes. After removing the automatic warehouse database pos indicator housing you should take out both the manual transaxle upper console panel and the automatic and manual transaxle upper rear console assembly. Disconnect the assembly parts of the automatic air conditioning system starting with console box pocket then carpet and console box assembly. Next remove the No. 1 console box duct. Unplug the yaw rate sensor connector then remove its two retaining bolts and retain the sensor within its bracket. When dealing with Bosch sensors remove the two bracket nuts and simultaneously take off the sensor from its mounting position.

OEM 2008 Toyota Camry Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Yaw Sensors found

View related parts
2008 Toyota Camry Yaw Rate Sensor
Part Number: 89183-06010
$379.24 MSRP: $477.39
You Save: $98.15 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Yawrate; Suspension Yaw Sensor; Yaw Sensor
- Manufacturer Note: VSC-WITH
- Part Name Code: 89183A
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.5 x 4.1 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89183-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Yaw Rate Sensor
Part Number: 89180-33050
$1264.86 MSRP: $1853.67
You Save: $588.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor; Sensor, Yawrate
- Manufacturer Note: W(VSC)
- Part Name Code: 89183A
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.6 x 4.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Yaw Rate Sensor
Part Number: 89180-33060
$538.77 MSRP: $789.58
You Save: $250.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor
- Part Name Code: 89180
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.5 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-33060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Camry Yaw Sensor

Looking for affordable OEM 2008 Toyota Camry Yaw Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Camry Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Camry Yaw Sensor Parts Q&A

Q: How to properly remove the Yaw Sensor on 2008 Toyota Camry?
A: Begin by taking off both automatic and manual transaxle shift lever knobs and then both No. 1 and No. 2 instrument cluster finish panel garnishes. After removing the automatic warehouse database pos indicator housing you should take out both the manual transaxle upper console panel and the automatic and manual transaxle upper rear console assembly. Disconnect the assembly parts of the automatic air conditioning system starting with console box pocket then carpet and console box assembly. Next remove the No. 1 console box duct. Unplug the yaw rate sensor connector then remove its two retaining bolts and retain the sensor within its bracket. When dealing with Bosch sensors remove the two bracket nuts and simultaneously take off the sensor from its mounting position.