How to install the rear speed sensor on 2008 Toyota Tundra?

You must first route the skid control wire by tightening nut A to 9 ft-lbf (127 kgf-cm, 13 Nm). Make sure the clamp rotation stopper has contact with its installation place. Securely affix the sensor clamp with the bolt (labeled B) by torquing it to the same specification but avoid wire harness twisting while inserting 7 clips (labeled C) that should be placed correctly as per the illustration. Connect the sensor connector at position (D) properly. Secure the rear speed sensor LH by installing its speed sensor (identified as A) together with the nut (identified as B) to an 11 Nm torque (107 kgf-cm, 8 ft-lbf). After doing so connect the speed sensor connector (designated as C). Implement the same connection procedure along with the torque specifications for the rear speed sensor RH. During rear wheel installation you should tighten aluminum wheels to 131 Nm and steel wheels to 209 Nm. The diagnostic procedure includes checking speed sensor signals after reconnecting the cable to the negative battery terminal while acknowledging that certain systems necessitate system initialization.

OEM 2008 Toyota Tundra Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2008 Toyota Tundra Vehicle Speed Sensor
Part Number: 89413-0C011
$105.69 MSRP: $148.35
You Save: $42.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Input Sensor; Output Sensor; Transmission Revolution Sensors (SP2, NT)
- Manufacturer Note: (L)
- Replaces: 89413-0C010, 89413-32011, 89413-32010
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota Tundra Vehicle Speed Sensor
Part Number: 89413-0C021
$105.69 MSRP: $148.35
You Save: $42.66 (29%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Sensor, Transmission Revolution (SP2); Sensor, Transmission Revolution(NT)
- Replaces: 89413-0C020
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-0C021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra ABS Sensor, Front Driver Side
Part Number: 89543-0C020
$220.41 MSRP: $314.69
You Save: $94.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left, Rear Left; Speed Sensor; Front/Rear Driver Side ABS Wheel Speed Sensor.
- Position: Front Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 10.1 x 6.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra ABS Sensor, Front Passenger Side
Part Number: 89542-0C020
$230.77 MSRP: $329.49
You Save: $98.72 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right, Rear Right; Speed Sensor; Front/Rear Passenger Side ABS Wheel Speed Sensor.
- Position: Front Passenger Side
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.3 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Speed Sensor

Looking for affordable OEM 2008 Toyota Tundra Speed Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Parts Questions & Experts Answers

Q: How to install the rear speed sensor on 2008 Toyota Tundra?
A: You must first route the skid control wire by tightening nut A to 9 ft-lbf (127 kgf-cm, 13 Nm). Make sure the clamp rotation stopper has contact with its installation place. Securely affix the sensor clamp with the bolt (labeled B) by torquing it to the same specification but avoid wire harness twisting while inserting 7 clips (labeled C) that should be placed correctly as per the illustration. Connect the sensor connector at position (D) properly. Secure the rear speed sensor LH by installing its speed sensor (identified as A) together with the nut (identified as B) to an 11 Nm torque (107 kgf-cm, 8 ft-lbf). After doing so connect the speed sensor connector (designated as C). Implement the same connection procedure along with the torque specifications for the rear speed sensor RH. During rear wheel installation you should tighten aluminum wheels to 131 Nm and steel wheels to 209 Nm. The diagnostic procedure includes checking speed sensor signals after reconnecting the cable to the negative battery terminal while acknowledging that certain systems necessitate system initialization.