×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota Tundra Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Lines found
2008 Toyota Tundra Flex Hose, Front
Part Number: 90947-A2016$45.76 MSRP: $63.69You Save: $17.93 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.1 x 6.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2016
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Tundra Flex Hose, Rear Outer
Part Number: 90947-A2089$42.05 MSRP: $58.54You Save: $16.49 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Outer; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hose, Flexible(For Rear Driver Side); Brake Hydraulic Hose; Hydraulic Hose
- Position: Rear Outer
- Replaces: 90947-A2013
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2089
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Tundra Brake Line
Looking for affordable OEM 2008 Toyota Tundra Brake Line? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Tundra Brake Line Parts Q&A
- Q: How to install the rear Brake Line on 2008 Toyota Tundra?A: Install the rear brake flexible hose by first attaching it and its new gasket to the disc brake cylinder using the union bolt until its torque reaches 30 Nm (306 kgf-cm, 22 ft-lbf). Secure the flexible hose within the lock hole of the cylinder followed by connecting it to the brake tube with a fresh clip. Use the union nut wrench to join the flexible hose with the brake tube then secure the flexible hose using a wrench before tightening at 15 Nm (155 kgf-cm, 11 ft-lbf) torque while avoiding brake tube damage and blocking any foreign matter from the connection spot. A torque wrench with a 300 mm (11.8 in.) fulcrum length should be used to reach accurate torque values when the union wrench remains parallel to the torque wrench body. Post-installation procedures include filling the brake fluid into the reservoir followed by bleaching air from the brake master cylinder and brake line together with VSC actuator assembly and safely checking the brake fluid levels while inspecting for fluid leaks. Seal the wheel into its proper place by securing aluminum wheels with 131 Nm (1336 kgf-cm, 97 ft-lbf) torque and steel wheels with 209 Nm (2131 kgf-cm, 154 ft-lbf) torque.