How to service and repair the oxygen sensor on 2008 Toyota Tundra?

The service and repair process for the oxygen sensor starts by disconnecting the cable from the negative battery terminal while waiting 90 seconds after ignition switch shutdown because the navigation system needs time to record memory before proceeding. Regular Cab Standard Deck requires the removal of 4 bolts and 2 nuts from the front No.3 exhaust pipe sub-assembly before disconnecting the support and eliminating the 2 gaskets. Starting with the front No. 2 exhaust pipe assembly removal requires disconnecting the air fuel ratio sensor connector and heated oxygen sensor connector before removing 3 nuts and extracting the exhaust pipe together with its gasket. The procedure for alternative configurations requires keeping up with the initial steps and adding the removal of 2 additional bolts. The front exhaust pipe assembly removal process begins with disconnection of the air fuel ratio sensor connector followed by the heated oxygen sensor connector and two clamps before removing two bolts, three nuts, the exhaust pipe and its two gaskets. The technician should use Special Service Tool: 09224-00010 to disconnect the Bank 1 Sensor 1 and Bank 2 Sensor 1 air fuel ratio sensors.

OEM 2008 Toyota Tundra Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oxygen Sensors found

View related parts
2008 Toyota Tundra Oxygen Sensor, Driver Side
Part Number: 89465-0C180
$118.55 MSRP: $167.81
You Save: $49.26 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Left; Rear Oxygen Sensor
- Manufacturer Note: LH
- Position: Driver Side
- Part Name Code: 89465
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.2 x 3.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-0C180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Oxygen Sensor, Passenger Side
Part Number: 89465-0C190
$119.72 MSRP: $169.48
You Save: $49.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Right; Rear Oxygen Sensor
- Manufacturer Note: RH
- Position: Passenger Side
- Part Name Code: 89465
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.4 x 3.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-0C190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Sensor, Air Fuel Ratio, Front Driver Side
Part Number: 89467-04060
$187.09 MSRP: $267.11
You Save: $80.02 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor
- Position: Front Driver Side
- Replaces: 89467-35110
- Part Name Code: 89467B
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.3 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89467-04060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Oxygen Sensor

Looking for affordable OEM 2008 Toyota Tundra Oxygen Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Oxygen Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Parts Questions & Experts Answers

Q: How to service and repair the oxygen sensor on 2008 Toyota Tundra?
A: The service and repair process for the oxygen sensor starts by disconnecting the cable from the negative battery terminal while waiting 90 seconds after ignition switch shutdown because the navigation system needs time to record memory before proceeding. Regular Cab Standard Deck requires the removal of 4 bolts and 2 nuts from the front No.3 exhaust pipe sub-assembly before disconnecting the support and eliminating the 2 gaskets. Starting with the front No. 2 exhaust pipe assembly removal requires disconnecting the air fuel ratio sensor connector and heated oxygen sensor connector before removing 3 nuts and extracting the exhaust pipe together with its gasket. The procedure for alternative configurations requires keeping up with the initial steps and adding the removal of 2 additional bolts. The front exhaust pipe assembly removal process begins with disconnection of the air fuel ratio sensor connector followed by the heated oxygen sensor connector and two clamps before removing two bolts, three nuts, the exhaust pipe and its two gaskets. The technician should use Special Service Tool: 09224-00010 to disconnect the Bank 1 Sensor 1 and Bank 2 Sensor 1 air fuel ratio sensors.