How to install the front Sway Bar Kit on 2008 Toyota Tacoma?

Start the installation of 2WD front sway bar kit by first installing the front sway bar kit itself. You should mount the front sway bar kit lower bracket bush LH onto the bush stopper's inner surface of the sway bar kit while facing the bracket toward the front. The RH procedure matches exactly with the installation instructions for the LH side. Place Front sway bar bracket No. 1 LH while using 2 bolts that require 21 Nm (214 kgf-cm, 16 ft-lbf) torque. The installation process for the RH side duplicates the procedures used previously. Secondly install the front sway bar link assembly LH with 2 nuts, 2 cushions along with 2 retainer pieces using a hexagon wrench on the stud when the ball joint turns with the nut. Apply torque of 19 Nm (194 kgf-cm, 14 ft-lbf) for Nut A along with 69 Nm (704 kgf-cm, 51 ft-lbf) for Nut B. The installation for the RH side mirrors that of the LH side. Last but not least install the front wheels using a torque of 113 Nm (1,152 kgf-cm, 83 ft-lbf).

OEM 2008 Toyota Tacoma Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2008 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-04100
$174.48 MSRP: $246.99
You Save: $72.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 42.9 x 12.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-04100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-04130
$156.97 MSRP: $222.21
You Save: $65.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 42.9 x 12.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-04130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-AD050
$143.57 MSRP: $203.25
You Save: $59.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 44.2 x 12.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AD050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Stabilizer Bar, Rear
Part Number: 48812-AD030
$124.54 MSRP: $176.30
You Save: $51.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.30 Pounds
- Item Dimensions: 41.1 x 9.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AD030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS

2008 Toyota Tacoma Sway Bar Kit

Looking for affordable OEM 2008 Toyota Tacoma Sway Bar Kit? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parts Questions & Experts Answers

Q: How to install the front Sway Bar Kit on 2008 Toyota Tacoma?
A: Start the installation of 2WD front sway bar kit by first installing the front sway bar kit itself. You should mount the front sway bar kit lower bracket bush LH onto the bush stopper's inner surface of the sway bar kit while facing the bracket toward the front. The RH procedure matches exactly with the installation instructions for the LH side. Place Front sway bar bracket No. 1 LH while using 2 bolts that require 21 Nm (214 kgf-cm, 16 ft-lbf) torque. The installation process for the RH side duplicates the procedures used previously. Secondly install the front sway bar link assembly LH with 2 nuts, 2 cushions along with 2 retainer pieces using a hexagon wrench on the stud when the ball joint turns with the nut. Apply torque of 19 Nm (194 kgf-cm, 14 ft-lbf) for Nut A along with 69 Nm (704 kgf-cm, 51 ft-lbf) for Nut B. The installation for the RH side mirrors that of the LH side. Last but not least install the front wheels using a torque of 113 Nm (1,152 kgf-cm, 83 ft-lbf).