How to reassemble the front shock absorber with coil spring on 2008 Toyota Tacoma?

The process to reassemble the front shock absorber with coil spring for 2WD starts with front coil spring LH compression using Special Service Tools: 09727-30021, 09727-00010, 09727-00031 but prevents the usage of impact wrenches to protect the tools from damage. Set the front coil spring onto the shock absorber front by fitting its lower end into the spring lower seat gap. The assembly of the front shock absorber cushion retainer should start first followed by the front coil spring insulator upper and finally the front suspension support sub-assembly. Position the front shock absorber cushion No. 1 followed by the front shock absorber cushion retainer. Position the suspension support correctly with the absorber bush according to the illustration and install a new lock nut by tightening it to 27 Nm (275 kgf-cm, 20 ft-lbf) with caution because impact wrenches could damage the shock absorber rod. Release the coil spring and inspect the position of the suspension support at this time.

OEM 2008 Toyota Tacoma Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Shock Absorbers found

View related parts
2008 Toyota Tacoma Shock Absorber
Part Number: 48530-09B50
$62.91 MSRP: $88.31
You Save: $25.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-04020
- Item Weight: 2.60 Pounds
- Item Dimensions: 25.6 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09B50
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber, Rear Passenger Side
Part Number: 48530-A9330
$54.72 MSRP: $76.16
You Save: $21.44 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-AD040
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 7.10 Pounds
- Item Dimensions: 26.9 x 6.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber, Rear Driver Side
Part Number: 48540-A9200
$54.24 MSRP: $75.50
You Save: $21.26 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit.; Shock; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-AD040
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.80 Pounds
- Item Dimensions: 26.1 x 6.5 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-A9200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber, Rear Passenger Side
Part Number: 48530-09E40
$47.79 MSRP: $66.52
You Save: $18.73 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Shock Absorber; Shock; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-04010
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 7.00 Pounds
- Item Dimensions: 26.6 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09E40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber, Rear Driver Side
Part Number: 48540-09530
$47.07 MSRP: $65.52
You Save: $18.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-04010
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.6 x 6.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09530
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber
Part Number: 48510-09L90
$135.11 MSRP: $191.27
You Save: $56.16 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-04090
- Item Weight: 9.60 Pounds
- Item Dimensions: 27.1 x 8.6 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09L90
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber
Part Number: 48510-09L80
$129.83 MSRP: $183.78
You Save: $53.95 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-04080
- Item Weight: 6.20 Pounds
- Item Dimensions: 26.6 x 8.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09L80
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber
Part Number: 48510-A9630
$118.13 MSRP: $165.82
You Save: $47.69 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly Set, S; Suspension Kit; Strut Assembly; Shock Absorber; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side
- Replaces: 48510-A9490
- Item Weight: 9.80 Pounds
- Item Dimensions: 26.4 x 8.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9630
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber, Front Driver Side
Part Number: 48520-09F00
$97.28 MSRP: $136.55
You Save: $39.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48520-04010
- Position: Front Driver Side
- Part Name Code: 48520
- Item Weight: 6.40 Pounds
- Item Dimensions: 26.4 x 8.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-09F00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber, Front Passenger Side
Part Number: 48510-09F40
$97.28 MSRP: $136.55
You Save: $39.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Shock
- Manufacturer Note: MARK 48510-04060
- Position: Front Passenger Side
- Part Name Code: 48510
- Item Weight: 9.40 Pounds
- Item Dimensions: 26.4 x 8.5 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09F40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber, Front Passenger Side
Part Number: 48510-A9640
$85.43 MSRP: $119.92
You Save: $34.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Right Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit.; Strut; Absorber Assembly, Shock, Front Passenger Side
- Manufacturer Note: MARK 48510-AD080
- Position: Front Passenger Side
- Part Name Code: 48510
- Item Weight: 9.20 Pounds
- Item Dimensions: 26.1 x 8.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9640
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber
Part Number: 48530-A9340
$67.65 MSRP: $94.96
You Save: $27.31 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 26.9 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Shock Absorber, Front Driver Side
Part Number: 48520-A9310
$85.43 MSRP: $119.92
You Save: $34.49 (29%)
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Left Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit.; Strut; Absorber Assembly, Shock, Front Driver Side
- Manufacturer Note: MARK 48520-AD010
- Position: Front Driver Side
- Part Name Code: 48520
- Item Weight: 9.50 Pounds
- Item Dimensions: 26.4 x 8.4 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-A9310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, X-Runner | 6 Cyl 4.0 L GAS

2008 Toyota Tacoma Shock Absorber

Looking for affordable OEM 2008 Toyota Tacoma Shock Absorber? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parts Questions & Experts Answers

Q: How to reassemble the front shock absorber with coil spring on 2008 Toyota Tacoma?
A: The process to reassemble the front shock absorber with coil spring for 2WD starts with front coil spring LH compression using Special Service Tools: 09727-30021, 09727-00010, 09727-00031 but prevents the usage of impact wrenches to protect the tools from damage. Set the front coil spring onto the shock absorber front by fitting its lower end into the spring lower seat gap. The assembly of the front shock absorber cushion retainer should start first followed by the front coil spring insulator upper and finally the front suspension support sub-assembly. Position the front shock absorber cushion No. 1 followed by the front shock absorber cushion retainer. Position the suspension support correctly with the absorber bush according to the illustration and install a new lock nut by tightening it to 27 Nm (275 kgf-cm, 20 ft-lbf) with caution because impact wrenches could damage the shock absorber rod. Release the coil spring and inspect the position of the suspension support at this time.

Related 2008 Toyota Tacoma Parts

Alternate Year Models

2007 Toyota Tacoma Shock Absorber 2009 Toyota Tacoma Shock Absorber