My Garage
Cart
Make sure this part fits

Toyota 48510-09L80
Shock Absorber

2005-2011 Toyota Tacoma 4851009L80

Customer Questions & Expert Answers (8)
Toyota 48510-09L80 Shock Absorber
Toyota 48510-09L80 Shock Absorber
  • Part Description
    Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut
  • Manufacturer
    Toyota
Make sure this part fits
$129.83 MSRP: $183.78
You Save: $53.95 (30%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Manufacturer Part Number48510-09L80
    Part DescriptionAbsorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut
    Other NamesStrut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
    Manufacturer NoteMARK 48510-04080
    Item Dimensions26.6 x 8.4 x 7.6 inches
    Item Weight6.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU48510-09L80
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2011 Toyota TacomaBase, Pre Runner, X-Runner4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 48510-09L80 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 48510-09L80 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the first step to install the front shock absorber with coil spring for 2WD for the 2008 Toyota Tacoma? Posted by Customer
    A:
    Begin by temporarily tightening the front shock absorber with coil spring.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Shock Absorber
    Q:
    What components are used when installing the new shock absorber for the 2005 Toyota Tacoma? Posted by Customer
    A:
    Use the 3 cushion retainers, cushion No.1, cushion No.3, and a new nut.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after compressing the front coil spring for the 2008 Toyota Tacoma? Posted by Customer
    A:
    Install the front coil spring onto the shock absorber front, fitting the lower end of the spring into the gap of the spring lower seat.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the final step in the installation process for the 2009 Toyota Tacoma? Posted by Customer
    A:
    Fully tighten the rear shock absorber nut to a torque of 100 Nm (1,020 kgf-cm, 74 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after installing the rear shock absorber for the 2006 Toyota Tacoma? Posted by Customer
    A:
    Reinstall the rear wheel, tightening it to a torque of 113 Nm (1,152 kgf-cm, 83 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step in servicing and repairing the front shock absorber with coil spring for the 2007 Toyota Tacoma? Posted by Customer
    A:
    Begin by disconnecting the cable from the negative battery terminal, removing the front wheel, separating the skid control sensor wire, and the front flexible hose.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the torque specification for fully tightening the front shock absorber with coil spring nut for the 2009 Toyota Tacoma? Posted by Customer
    A:
    Fully tighten it to 83 Nm (846 kgf-cm, 61 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 48510-09L80, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 48510-09L80 Shock Absorber. It is sometimes referred to as Toyota Shock Absorber. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4851009L80 Shock Absorber. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery