How to service and repair the front shock absorber with coil spring on 2007 Toyota Tacoma?

Start the shock absorber coil spring repair by disconnecting battery cables and removing the wheels followed by separating wires and hoses before taking out upper arm suspension bolts. The service of front shock absorber coils requires starting by removing the front suspension upper arm along with the front shock absorber coil spring through bolt and nut and washer maintenance then advancing to the separate of three nuts from the upper side. The coil spring compression operation needs Special Service Tool: 09727-30021 (09727-00010, 09727-00031, 09727-00060) to work. Grasp the shock absorber rod during this process until you can remove the nut. The removal sequence consists of front shock absorber cushion retainer followed by front shock absorber cushion No. 1 then front suspension support sub-assembly and lastly front coil spring insulator upper and front coil spring. A shock absorber assembly examination requires activity of the rod to determine abnormal resistance or sound conditions before replacement decisions are made. To reinstall the front coil spring use the same compressive service tool to reduce its size until the lower end reaches the spring lower seat gap. The installation order begins with placing front shock absorber cushion retainer then front coil spring insulator upper followed by front suspension support sub-assembly and front shock absorber cushion No. 1 then front shock absorber cushion retainer. Adhere the suspension support to the absorber bush while securely fastening a new lock nut to 27 Nm torque using a torque wrench instead of an impact drive. Position the front shock absorber with coil spring while angling its coil spring lower end toward the LH side outer portion and RH side inner portion before tightening three upper-side nuts and bolt to 64 Nm (653 kgf-cm, 47 ft. lbs.) while temporarily securing the bolt, nut, and washer. The technician must install the front flexible hose and skid control sensor wire along with the front wheel by using 113 Nm (1,152 kgf-cm, 83 ft. lbs.) torque on the front suspension upper arm while it is temporarily tightened. The suspension needs stabilization through vehicle jacking with multiple bounce sessions before tightening both the front shock absorber with coil spring to 83 Nm and front suspension upper arm fully. After checking the front wheel alignment you need to reinstall the negative battery cable at 3.9 Nm (40 kgf-cm, 35 inch lbs.). To discharge gas from the shock absorber position the piston rod fully extended while.Angle-fixing it in the vise then use a drill slowly with a shop rag protection to create a hole in the shaded area.

OEM 2007 Toyota Tacoma Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Shock Absorbers found

View related parts
2007 Toyota Tacoma Shock Absorber
Part Number: 48530-09B50
$62.91 MSRP: $88.31
You Save: $25.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-04020
- Item Weight: 2.60 Pounds
- Item Dimensions: 25.6 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09B50
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber, Rear Passenger Side
Part Number: 48530-A9330
$54.72 MSRP: $76.16
You Save: $21.44 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-AD040
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 7.10 Pounds
- Item Dimensions: 26.9 x 6.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber, Rear Driver Side
Part Number: 48540-A9200
$54.24 MSRP: $75.50
You Save: $21.26 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit.; Shock; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-AD040
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.80 Pounds
- Item Dimensions: 26.1 x 6.5 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-A9200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber, Rear Passenger Side
Part Number: 48530-09E40
$47.79 MSRP: $66.52
You Save: $18.73 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Shock Absorber; Shock; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-04010
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 7.00 Pounds
- Item Dimensions: 26.6 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09E40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber, Rear Driver Side
Part Number: 48540-09530
$47.07 MSRP: $65.52
You Save: $18.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-04010
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.6 x 6.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09530
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber
Part Number: 48510-09L90
$135.11 MSRP: $191.27
You Save: $56.16 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-04090
- Item Weight: 9.60 Pounds
- Item Dimensions: 27.1 x 8.6 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09L90
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber
Part Number: 48510-09L80
$129.83 MSRP: $183.78
You Save: $53.95 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-04080
- Item Weight: 6.20 Pounds
- Item Dimensions: 26.6 x 8.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09L80
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber
Part Number: 48510-A9630
$118.13 MSRP: $165.82
You Save: $47.69 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly Set, S; Suspension Kit; Strut Assembly; Shock Absorber; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side
- Replaces: 48510-A9490
- Item Weight: 9.80 Pounds
- Item Dimensions: 26.4 x 8.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9630
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber, Front Driver Side
Part Number: 48520-09F00
$97.28 MSRP: $136.55
You Save: $39.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48520-04010
- Position: Front Driver Side
- Part Name Code: 48520
- Item Weight: 6.40 Pounds
- Item Dimensions: 26.4 x 8.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-09F00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber, Front Passenger Side
Part Number: 48510-09F40
$97.28 MSRP: $136.55
You Save: $39.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Shock
- Manufacturer Note: MARK 48510-04060
- Position: Front Passenger Side
- Part Name Code: 48510
- Item Weight: 9.40 Pounds
- Item Dimensions: 26.4 x 8.5 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09F40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber, Front Passenger Side
Part Number: 48510-A9640
$85.43 MSRP: $119.92
You Save: $34.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Right Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit.; Strut; Absorber Assembly, Shock, Front Passenger Side
- Manufacturer Note: MARK 48510-AD080
- Position: Front Passenger Side
- Part Name Code: 48510
- Item Weight: 9.20 Pounds
- Item Dimensions: 26.1 x 8.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9640
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber
Part Number: 48530-A9340
$67.65 MSRP: $94.96
You Save: $27.31 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 26.9 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Shock Absorber, Front Driver Side
Part Number: 48520-A9310
$85.43 MSRP: $119.92
You Save: $34.49 (29%)
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Left Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit.; Strut; Absorber Assembly, Shock, Front Driver Side
- Manufacturer Note: MARK 48520-AD010
- Position: Front Driver Side
- Part Name Code: 48520
- Item Weight: 9.50 Pounds
- Item Dimensions: 26.4 x 8.4 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-A9310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, X-Runner | 6 Cyl 4.0 L GAS

2007 Toyota Tacoma Shock Absorber

Looking for affordable OEM 2007 Toyota Tacoma Shock Absorber? Explore our comprehensive catalogue of genuine 2007 Toyota Tacoma Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the front shock absorber with coil spring on 2007 Toyota Tacoma?
A: Start the shock absorber coil spring repair by disconnecting battery cables and removing the wheels followed by separating wires and hoses before taking out upper arm suspension bolts. The service of front shock absorber coils requires starting by removing the front suspension upper arm along with the front shock absorber coil spring through bolt and nut and washer maintenance then advancing to the separate of three nuts from the upper side. The coil spring compression operation needs Special Service Tool: 09727-30021 (09727-00010, 09727-00031, 09727-00060) to work. Grasp the shock absorber rod during this process until you can remove the nut. The removal sequence consists of front shock absorber cushion retainer followed by front shock absorber cushion No. 1 then front suspension support sub-assembly and lastly front coil spring insulator upper and front coil spring. A shock absorber assembly examination requires activity of the rod to determine abnormal resistance or sound conditions before replacement decisions are made. To reinstall the front coil spring use the same compressive service tool to reduce its size until the lower end reaches the spring lower seat gap. The installation order begins with placing front shock absorber cushion retainer then front coil spring insulator upper followed by front suspension support sub-assembly and front shock absorber cushion No. 1 then front shock absorber cushion retainer. Adhere the suspension support to the absorber bush while securely fastening a new lock nut to 27 Nm torque using a torque wrench instead of an impact drive. Position the front shock absorber with coil spring while angling its coil spring lower end toward the LH side outer portion and RH side inner portion before tightening three upper-side nuts and bolt to 64 Nm (653 kgf-cm, 47 ft. lbs.) while temporarily securing the bolt, nut, and washer. The technician must install the front flexible hose and skid control sensor wire along with the front wheel by using 113 Nm (1,152 kgf-cm, 83 ft. lbs.) torque on the front suspension upper arm while it is temporarily tightened. The suspension needs stabilization through vehicle jacking with multiple bounce sessions before tightening both the front shock absorber with coil spring to 83 Nm and front suspension upper arm fully. After checking the front wheel alignment you need to reinstall the negative battery cable at 3.9 Nm (40 kgf-cm, 35 inch lbs.). To discharge gas from the shock absorber position the piston rod fully extended while.Angle-fixing it in the vise then use a drill slowly with a shop rag protection to create a hole in the shaded area.

Related 2007 Toyota Tacoma Parts

Alternate Year Models

2006 Toyota Tacoma Shock Absorber 2008 Toyota Tacoma Shock Absorber