Toyota 48812-AD030
Stabilizer Bar, Rear

The first step to remove the rear sway bar kit from the Sport Suspension Package is to take off the rear wheel. The next step requires removal of the rear sway bar link assembly left-hand link by securing the 2 nuts and sway bar link together then taking off each piece while using a hexagon wrench (6 mm) to prevent ball joint rotation with the nut. Both right-hand side sway bar link assembly removal steps follow the same process as left-hand side procedures. The maintenance process requires first removing the rear sway bar kit through the steps of disassembling bolt components and sway bar brackets then extracting the sway bar kit before extracting sway bar bushes from its structure.

Remove the 2 nuts and the stabilizer link; if the ball joint rotates with the nut, use a hexagon wrench (6 mm) to hold the stud.

Install it onto the inner side of the bush stopper on the stabilizer bar, ensuring the cut line faces the front.

Begin by removing the front wheels.

Take out 2 bolts on the left side, and do the same for the right side.

No, the installation procedure for the RH side is identical.