How to install the front Sway Bar Kit on 2009 Toyota Tacoma?

First install the front sway bar kit and then move onto the front sway bar kit lower bracket bush LH for 2WD installation. The installation of the front sway bar kit lower bracket bush LH starts by placing it on the inner side of the bush stopper on the sway bar kit with its cut line facing forward. Set-up steps are precisely the same when putting in sway bar kit components for the right-hand side. Use 2 bolts to install the front sway bar bracket No. 1 LH at 21 Nm (214 kgf-cm, 16 ft-lbf) torque and perform the same process on the RH side. After installing two retainer and two cushion elements into the front sway bar link assembly LH position Nut A to 19 Nm (194 kgf-cm, 14 ft-lbf) and Nut B to 69 Nm (704 kgf-cm, 51 ft-lbf) while using a hexagon wrench to stabilize the stud when it turns with the nut. Usage of these steps also applies to the RH side of the installation process. The front wheels installation must be followed by a torque value of 113 Nm (1,152 kgf-cm, 83 ft-lbf).

OEM 2009 Toyota Tacoma Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2009 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-04100
$174.48 MSRP: $246.99
You Save: $72.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 42.9 x 12.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-04100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-04130
$156.97 MSRP: $222.21
You Save: $65.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 42.9 x 12.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-04130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-AD050
$143.57 MSRP: $203.25
You Save: $59.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 44.2 x 12.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AD050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Stabilizer Bar, Rear
Part Number: 48812-AD030
$124.54 MSRP: $176.30
You Save: $51.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.30 Pounds
- Item Dimensions: 41.1 x 9.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AD030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS

2009 Toyota Tacoma Sway Bar Kit

Looking for affordable OEM 2009 Toyota Tacoma Sway Bar Kit? Explore our comprehensive catalogue of genuine 2009 Toyota Tacoma Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Tacoma Parts Questions & Experts Answers

Q: How to install the front Sway Bar Kit on 2009 Toyota Tacoma?
A: First install the front sway bar kit and then move onto the front sway bar kit lower bracket bush LH for 2WD installation. The installation of the front sway bar kit lower bracket bush LH starts by placing it on the inner side of the bush stopper on the sway bar kit with its cut line facing forward. Set-up steps are precisely the same when putting in sway bar kit components for the right-hand side. Use 2 bolts to install the front sway bar bracket No. 1 LH at 21 Nm (214 kgf-cm, 16 ft-lbf) torque and perform the same process on the RH side. After installing two retainer and two cushion elements into the front sway bar link assembly LH position Nut A to 19 Nm (194 kgf-cm, 14 ft-lbf) and Nut B to 69 Nm (704 kgf-cm, 51 ft-lbf) while using a hexagon wrench to stabilize the stud when it turns with the nut. Usage of these steps also applies to the RH side of the installation process. The front wheels installation must be followed by a torque value of 113 Nm (1,152 kgf-cm, 83 ft-lbf).