How to install the side Air Bag sensor on 2008 Toyota Tacoma?

The procedure to install the side Air Bag sensor begins with disconnecting the battery negative cable. The installer must wait 90 seconds before starting work and the ignition switch must remain in OFF position. Seamly install the side Air Bag sensor by securing it with the bolt while tightening it to 9.0 Nm (80 kgf-cm, 80 in-lbf). Install the connector after the sensor assembly that includes verification of proper component torque. The sensor assembly requires immediate replacement with a new one when it has experienced any drop damage or presents any cracked or dented features. The installer must verify secure mounting of the sensor assembly by shaking it after completing wiring. The SRS wiring must remain free from contact with other components during installation. Run a thorough check along the installation areas of the side Air Bag sensor before attaching its connector. Install the center pillar lower garnish LH and lap belt outer anchor cover together with the rear door opening trim Weather Strip LH, front door opening trim Weather Strip LH alongside rear door scuff plate LH and front door scuff plate LH. Before completing installation gives the negative battery terminal a torque of 3.9 Nm (40 kgf-cm, 35 in-lbf) after reconnecting the cable and verifies SRS warning light functionality.

OEM 2008 Toyota Tacoma Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Air Bag Sensors found

View related parts
2008 Toyota Tacoma Front Impact Sensor
Part Number: 89173-09270
$97.75 MSRP: $117.85
You Save: $20.10 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Replaces: 89173-09280
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09270
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Position Sensor, Passenger Side
Part Number: 89178-06030
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front/Right/Left; Air Bag Seat Sensor Mat; Occupant Detection Sensor; Air Bag Sensor; Occupant Sensor; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Position Sensor, Passenger Side
Part Number: 89178-06020
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left, Right; Air Bag Sensor; Occupant Sensor; Seat; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Side Impact Sensor, Front
Part Number: 89831-02040
$97.87 MSRP: $118.00
You Save: $20.13 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front, Upper; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-02040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Rear Sensor
Part Number: 89831-04020
$94.08 MSRP: $113.43
You Save: $19.35 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Position Sensor, Driver Side
Part Number: 89178-0W010
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Air Bag Sensor; Seat; Sensor, Seat Position Air Bag
- Position: Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-0W010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2008 Toyota Tacoma Air Bag Sensor

Looking for affordable OEM 2008 Toyota Tacoma Air Bag Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parts Questions & Experts Answers

Q: How to install the side Air Bag sensor on 2008 Toyota Tacoma?
A: The procedure to install the side Air Bag sensor begins with disconnecting the battery negative cable. The installer must wait 90 seconds before starting work and the ignition switch must remain in OFF position. Seamly install the side Air Bag sensor by securing it with the bolt while tightening it to 9.0 Nm (80 kgf-cm, 80 in-lbf). Install the connector after the sensor assembly that includes verification of proper component torque. The sensor assembly requires immediate replacement with a new one when it has experienced any drop damage or presents any cracked or dented features. The installer must verify secure mounting of the sensor assembly by shaking it after completing wiring. The SRS wiring must remain free from contact with other components during installation. Run a thorough check along the installation areas of the side Air Bag sensor before attaching its connector. Install the center pillar lower garnish LH and lap belt outer anchor cover together with the rear door opening trim Weather Strip LH, front door opening trim Weather Strip LH alongside rear door scuff plate LH and front door scuff plate LH. Before completing installation gives the negative battery terminal a torque of 3.9 Nm (40 kgf-cm, 35 in-lbf) after reconnecting the cable and verifies SRS warning light functionality.