How to install the headlight dimmer switch assembly and the steering wheel components on 2008 Toyota Tacoma?

First secure the 2 claws to install the headlight dimmer switch assembly as shown and attach it with the clamp and connect the necessary wires. The windshield wiper switch assembly requires installation before adding the spiral cable sub-assembly. Follow installation of the steering column upper cover with the steering column lower cover. Placing the spiral cable at its center point is necessary before fitting the steering wheel assembly. Check the horn button assembly position at the steering wheel center point and set the horn button before you put the assembly in its place. Associate the cable to the negative battery terminal while torquing it to 3.9 Nm (40 kgf-cm, 35 in-lbf). The inspection of SRS warning light must be completed before installing the No. 3 and No. 2 steering wheel lower covers.

OEM 2008 Toyota Tacoma Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Dimmer Switches found

View related parts
2008 Toyota Tacoma Instrument Light Rheostat, Passenger Side
Part Number: 84119-04020
$158.73 MSRP: $224.70
You Save: $65.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rheostat, Light Control; Instrument Panel Dimmer Switch; Rheostat
- Position: Passenger Side
- Part Name Code: 84119
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.3 x 11.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84119-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Dimmer Switch
Part Number: 84140-04061
$140.75 MSRP: $199.25
You Save: $58.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Headlamp Dimmer; Turn Signal & Combination Lever; Combination Switch; Multi Purpose Switch; Headlamp Switch; Headlamp Dimmer Switch
- Part Name Code: 84140
- Item Weight: 1.40 Pounds
- Item Dimensions: 15.3 x 11.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84140-04061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2008 Toyota Tacoma Dimmer Switch

Looking for affordable OEM 2008 Toyota Tacoma Dimmer Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Dimmer Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Dimmer Switch Parts Q&A

Q: How to install the headlight dimmer switch assembly and the steering wheel components on 2008 Toyota Tacoma?
A: First secure the 2 claws to install the headlight dimmer switch assembly as shown and attach it with the clamp and connect the necessary wires. The windshield wiper switch assembly requires installation before adding the spiral cable sub-assembly. Follow installation of the steering column upper cover with the steering column lower cover. Placing the spiral cable at its center point is necessary before fitting the steering wheel assembly. Check the horn button assembly position at the steering wheel center point and set the horn button before you put the assembly in its place. Associate the cable to the negative battery terminal while torquing it to 3.9 Nm (40 kgf-cm, 35 in-lbf). The inspection of SRS warning light must be completed before installing the No. 3 and No. 2 steering wheel lower covers.