How to install the park/neutral safety switch assembly for the A340E automatic transmission on 2008 Toyota Tacoma?

The first step to install the park/neutral position switch assembly for the A340E automatic transmission is to mount the switch onto the manual valve lever shaft while turning the adjusting bolt loosely. Place the grommet accompanied by a new lock washer and the nut which requires a torque wrench of 6.9 Nm (70 kgf-cm, 61 in-lbf) for installation. Insert the manual valve lever shaft into position on the groove followed by counterclockwise rotation of two notches to reach the neutral position. Use a 13 Nm (130 kgf-cm, 9 ft-lbf) torque to tighten the adjusting bolt while aligning the neutral basic line with the switch groove. Bending at least two tabs of the lock washer should occur. Initial connectivity of the forget and wire to the negative battery mark requires 3.9 Nm torque using a torque wrench (40 kgf-cm and 35 in-lbf). Perform inspections on the shift lever position and adjust the park/neutral position switch assembly when necessary.

OEM 2008 Toyota Tacoma Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Neutral Safety Switches found

View related parts
2008 Toyota Tacoma Neutral Safety Switch
Part Number: 84520-42010
$52.33 MSRP: $72.84
You Save: $20.51 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Clutch; Clutch Switch; Switch Assembly, Cruise Control Cancel; Switch Assembly, Clutch Start
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 1.9 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84520-42010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Range Sensor
Part Number: 84540-35050
$143.81 MSRP: $203.58
You Save: $59.77 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Neutral; Switch Assembly, Neutral Start
- Part Name Code: 84540
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.8 x 3.6 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84540-35050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Switch Assembly, Neutral Start
Part Number: 84540-04010
$130.77 MSRP: $185.11
You Save: $54.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Neutral
- Manufacturer Note: (L)
- Replaces: 84540-71010
- Part Name Code: 84540
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.0 x 3.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84540-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2008 Toyota Tacoma Neutral Safety Switch

Looking for affordable OEM 2008 Toyota Tacoma Neutral Safety Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Neutral Safety Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parts Questions & Experts Answers

Q: How to install the park/neutral safety switch assembly for the A340E automatic transmission on 2008 Toyota Tacoma?
A: The first step to install the park/neutral position switch assembly for the A340E automatic transmission is to mount the switch onto the manual valve lever shaft while turning the adjusting bolt loosely. Place the grommet accompanied by a new lock washer and the nut which requires a torque wrench of 6.9 Nm (70 kgf-cm, 61 in-lbf) for installation. Insert the manual valve lever shaft into position on the groove followed by counterclockwise rotation of two notches to reach the neutral position. Use a 13 Nm (130 kgf-cm, 9 ft-lbf) torque to tighten the adjusting bolt while aligning the neutral basic line with the switch groove. Bending at least two tabs of the lock washer should occur. Initial connectivity of the forget and wire to the negative battery mark requires 3.9 Nm torque using a torque wrench (40 kgf-cm and 35 in-lbf). Perform inspections on the shift lever position and adjust the park/neutral position switch assembly when necessary.