Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Right; Belt & Retractor; Latch; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side
Position: Outer Passenger Side
Part Name Code: 73360
Item Weight: 3.20 Pounds
Item Dimensions: 12.0 x 10.9 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-04072-A0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Center; Center Belt Assembly; Latch; Belt Assembly, Rear Seat, Outer Center
Manufacturer Note: SAND BEIGE,TRIM4#
Position: Center
Part Name Code: 73350C
Item Weight: 2.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73350-04043-A0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left; Belt & Retractor; Latch; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
Position: Outer Driver Side
Replaces: 73370-04051-B0
Part Name Code: 73370
Item Weight: 2.30 Pounds
Item Dimensions: 11.2 x 8.5 x 5.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73370-04052-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Rear; Belt Assembly, Rear Seat, Inner
Manufacturer Note: GRAY,TRIM1#
Position: Inner
Part Name Code: 73380D
Item Weight: 2.40 Pounds
Item Dimensions: 14.3 x 10.5 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: 73380-04051-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
| Page 1 of 2 |Next >
1-20 of 39 Results
2008 Toyota Tacoma Seat Belt
Looking for affordable OEM 2008 Toyota Tacoma Seat Belt? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Tacoma Parts Questions & Experts Answers
Q: How to install the front center Seat Belt for a bench seat type on 2008 Toyota Tacoma?
A: The front center seat outer belt for bench seats is installed through a process that requires attachment of the tether anchor bracket sub-assembly with bolt A and then bolt B to a torque value of 20 Nm (205 kgf-cm, 15 ft-lbf). You should install the seat belt bracket with two bolts while torquing them to 20 Nm (205 kgf-cm, 15 ft-lbf). The retractor's inclination must properly lock the rear seat shoulder belt guide and should work between 45 degrees and 15 degrees inclinations but never at 15 degrees or less. The retractor should not be disassembled but its replacement must happen if it fails to operate according to specifications. Position the lower retractor stay across the seat belt bracket hooks before tightening bolt A to 8.5 Nm (85 kgf-cm, 75 in-lbf) and bolt B to 42 Nm (430 kgf-cm, 31 ft-lbf). The shoulder anchor should receive two bolts that require a torque of 42 Nm (430 kgf-cm, 31 ft-lbf) while checking the ELR lock using the rear center seat outer belt shows that the anchor should not rest above the floor panel. The rear center seat outer belt needs replacement if the locking mechanism faulty when pulling the belt swiftly. To finish install the seat belt retractor cover by using its 4 clips while using the correct claw procedures to install both the back panel upper garnish and back panel trim cover for the opposite side.