Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Replaces: 89173-09280
Item Weight: 0.70 Pounds
Item Dimensions: 4.6 x 2.9 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-09270
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front/Right/Left; Air Bag Seat Sensor Mat; Occupant Detection Sensor; Air Bag Sensor; Occupant Sensor; Sensor, Seat Position Air Bag
Position: Passenger Side
Item Weight: 0.50 Pounds
Item Dimensions: 2.0 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-06030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front, Upper; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Position: Front
Item Weight: 0.60 Pounds
Item Dimensions: 4.2 x 2.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-02040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 2.7 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-04020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Air Bag Sensor; Seat; Sensor, Seat Position Air Bag
Position: Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.1 x 1.6 x 1.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-0W010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
2009 Toyota Tacoma Air Bag Sensor
Looking for affordable OEM 2009 Toyota Tacoma Air Bag Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Tacoma Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Tacoma Parts Questions & Experts Answers
Q: How to install the center Air Bag sensor assembly on 2009 Toyota Tacoma?
A: The installation process for the center Air Bag sensor assembly requires turning the ignition switch OFF and disconnecting the battery cable negative terminal while waiting for at least 90 seconds following removal of the terminal. A center Air Bag sensor should receive its 3 bolts for provisional installation when the sensor shows no damage from drops or possesses no signs of damage like cracks or dents or defects. Tighten the 3 bolts to 17.5 Nm (179 kgf-cm, 13 ft-lbf) torque-level before inspecting the installation parts for slack. Proof that the waterproof sheet correctly surrounds the center Air Bag sensor assembly becomes apparent through manager connection with connectors. The installation sequence should start with putting in place the front console box that fits manual and automatic transmission units on both bench and separate seat layouts, followed by the instrument panel cup holder tray suitable for automatic transmission on separate seats, rear console box assembly on separate seats and console upper rear panel sub-assembly suitable for manual and automati Finish the installation process by linking the cable to the negative battery terminal while applying 3.9 Nm torque force (40 kgf-cm, 35 in-lbf) then check the SRS warning light.