How to install the rear upper control arm on the LH side on 2008 Toyota RAV4?

The LH side rear upper control arm installation requires the control arm to be fixed in place using 2 bolts and 2 nuts but with the nuts secured while the bolts are only tightened temporarily. Skid control sensor wiring goes to the 2WD models but 4WD models require the connection of rear speed sensor LH. The rear wheel should be installed before tightening bolts to reach 103 Nm (1,050 kgf-cm, 76 ft-lbf). Two completion steps include fixing the 2 nuts in position and tightening the assembly's 2 bolts of the rear upper control arm assembly LH at 90 Nm (918 kgf-cm, 66 ft-lbf).

OEM 2008 Toyota RAV4 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arms found

View related parts
2008 Toyota RAV4 Lower Control Arm, Driver Side
Part Number: 48069-0R010
$177.18 MSRP: $252.98
You Save: $75.80 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Front Left Lower Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Replaces: 48069-42051
- Part Name Code: 48069
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.9 x 2.5 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-0R010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota RAV4 Lower Control Arm, Passenger Side
Part Number: 48068-0R010
$179.05 MSRP: $255.64
You Save: $76.59 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Front Right Lower Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Replaces: 48068-42050, 48068-42051
- Part Name Code: 48068
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.9 x 2.5 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-0R010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota RAV4 Arm Assembly, Upper Control, Rear Driver Side
Part Number: 48790-42020
$107.74 MSRP: $151.23
You Save: $43.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Upper Control; Suspension Trailing Arm; Suspension Control Arm; Control Arm
- Position: Rear Driver Side
- Part Name Code: 48790
- Item Weight: 3.30 Pounds
- Item Dimensions: 3.8 x 3.8 x 18.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48790-42020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota RAV4 Control Arm

Looking for affordable OEM 2008 Toyota RAV4 Control Arm? Explore our comprehensive catalogue of genuine 2008 Toyota RAV4 Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota RAV4 Parts Questions & Experts Answers

Q: How to install the rear upper control arm on the LH side on 2008 Toyota RAV4?
A: The LH side rear upper control arm installation requires the control arm to be fixed in place using 2 bolts and 2 nuts but with the nuts secured while the bolts are only tightened temporarily. Skid control sensor wiring goes to the 2WD models but 4WD models require the connection of rear speed sensor LH. The rear wheel should be installed before tightening bolts to reach 103 Nm (1,050 kgf-cm, 76 ft-lbf). Two completion steps include fixing the 2 nuts in position and tightening the assembly's 2 bolts of the rear upper control arm assembly LH at 90 Nm (918 kgf-cm, 66 ft-lbf).