How to Properly Install a Control Arm for Rear Suspension on 2009 Toyota RAV4?

The installation process for the LH rear upper control arm requires attaching it temporarily with 2 bolts and 2 nuts while fixing the nuts in position before tightening the bolts. The skid control sensor wire installation occurs for 2WD vehicles whereas the rear speed sensor LH wiring happens for 4WD vehicles. The rear wheel needs to be installed with 103 Nm of torque (1,050 kgf-cm, 76 ft-lbf). The rear upper control arm assembly LH should be tightened by securing the 2 nuts first before torques apply force at 90 Nm (918 kgf-cm, 66 ft-lbf).

OEM 2009 Toyota RAV4 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arms found

View related parts
2009 Toyota RAV4 Arm Assembly, Upper Control, Rear Driver Side
Part Number: 48790-42020
$107.74 MSRP: $151.23
You Save: $43.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Upper Control; Suspension Trailing Arm; Suspension Control Arm; Control Arm
- Position: Rear Driver Side
- Part Name Code: 48790
- Item Weight: 3.30 Pounds
- Item Dimensions: 3.8 x 3.8 x 18.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48790-42020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Lower Control Arm, Driver Side
Part Number: 48069-0R010
$177.18 MSRP: $252.98
You Save: $75.80 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Front Left Lower Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Replaces: 48069-42051
- Part Name Code: 48069
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.9 x 2.5 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-0R010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Lower Control Arm, Passenger Side
Part Number: 48068-0R010
$179.05 MSRP: $255.64
You Save: $76.59 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Front Right Lower Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Replaces: 48068-42050, 48068-42051
- Part Name Code: 48068
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.9 x 2.5 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-0R010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota RAV4 Control Arm

Looking for affordable OEM 2009 Toyota RAV4 Control Arm? Explore our comprehensive catalogue of genuine 2009 Toyota RAV4 Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota RAV4 Parts Questions & Experts Answers

Q: How to Properly Install a Control Arm for Rear Suspension on 2009 Toyota RAV4?
A: The installation process for the LH rear upper control arm requires attaching it temporarily with 2 bolts and 2 nuts while fixing the nuts in position before tightening the bolts. The skid control sensor wire installation occurs for 2WD vehicles whereas the rear speed sensor LH wiring happens for 4WD vehicles. The rear wheel needs to be installed with 103 Nm of torque (1,050 kgf-cm, 76 ft-lbf). The rear upper control arm assembly LH should be tightened by securing the 2 nuts first before torques apply force at 90 Nm (918 kgf-cm, 66 ft-lbf).