OEM 2009 Toyota RAV4 Ball Joint

2009 Toyota RAV4 Parts Questions & Experts Answers

• Q: How to install the front lower ball joint assembly on the LH side on 2009 Toyota RAV4?

  A: The assembly process for front lower ball joints on the LH side begins with bolt and nut attachment of the ball joint to the lower arm until it reaches 92 Nm (938 kgf-cm, 68 ft-lbf) torque. After installing the lower ball joint to the steering knuckle with a prescribed torque of 133 Nm (1,360 kgf-cm, 98 ft-lbf) you must add a new cotter pin; if the holes are misaligned the nut needs extra tightening by 60°. After installing the steering knuckle with its axle hub, connect both the front suspension lower No. 1 arm sub-assembly with the tie rod end sub-assembly. The repair process starts with installing the front disc followed by the front disc brake cylinder assembly LH and ending with the front axle hub nut. Finish the installation by putting the front speed sensor LH together with the front wheel while applying a torque of 103 Nm (1,050 kgf-cm, 76 ft-lbf) and check and align the front wheel if needed.