How to Service and Repair the Canister Purge Valve on 2008 Toyota Prius?

Start Canister Purge Valve installation by properly bolting the pressure switching valve where its torque needs to be set at 2.9 Nm (30 kgf-cm, 26 in-lbf). First attach the canister hoses to the pressure switching valve and install the valve before connecting it into position. Proceed to link the cable on the negative terminal of the battery. The installer should start by fitting the rear No. 3 floor board before moving on to the rear deck floor box and completing with the rear No. 2 floor board. Last step is initialization since some systems need this procedure after connecting and disconnecting the cable at the negative (-) battery terminal.

OEM 2008 Toyota Prius Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2008 Toyota Prius Vacuum Switch
Part Number: 90910-12274
$101.00 MSRP: $141.77
You Save: $40.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Vacuum Switch; Vapor Canister Purge Solenoid; Valve; Valve, Vacuum Switching(For Charcoal Canister)
- Part Name Code: 77740N
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.5 x 3.2 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90910-12274
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Prius Canister Purge Valve

Looking for affordable OEM 2008 Toyota Prius Canister Purge Valve? Explore our comprehensive catalogue of genuine 2008 Toyota Prius Canister Purge Valve. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Prius Parts Questions & Experts Answers

Q: How to Service and Repair the Canister Purge Valve on 2008 Toyota Prius?
A: Start Canister Purge Valve installation by properly bolting the pressure switching valve where its torque needs to be set at 2.9 Nm (30 kgf-cm, 26 in-lbf). First attach the canister hoses to the pressure switching valve and install the valve before connecting it into position. Proceed to link the cable on the negative terminal of the battery. The installer should start by fitting the rear No. 3 floor board before moving on to the rear deck floor box and completing with the rear No. 2 floor board. Last step is initialization since some systems need this procedure after connecting and disconnecting the cable at the negative (-) battery terminal.