OEM 2008 Toyota Prius Vapor Pressure Sensor

2008 Toyota Prius Parts Questions & Experts Answers

• Q: How to install the Vapor Pressure Sensor on 2008 Toyota Prius?

  A: First place the sensor onto the fuel tank retainer plug while installing the tube joint clip by ensuring a scratch-free connection that is properly inserted without foreign objects present and ensuring the collar clip sits on the sensor collar. Make certain the sensor stays firmly in position before joining the fuel tank pressure sensor connector. You should start by putting on the fuel tank sub-assembly and moving forward with front exhaust pipe installation. The inspection of fuel and exhaust gas leaks happens after connecting the cable to the negative battery terminal. The installation of the front floor panel brace continues to the rear floor service hole cover as well as the rear seat cushion assembly followed by the lower center instrument panel finish panel and the rear No. 3 floor board and rear deck floor box and rear No. 2 floor board. Completion of initialization should be done since some vehicle systems need it after removing the negative battery cable and reattaching it.