OEM 2008 Toyota Land Cruiser Neutral Safety Switch

2008 Toyota Land Cruiser Parts Questions & Experts Answers

• Q: How to install the Park/Neutral Safety Switch Assembly for the AB60F AUTOMATIC TRANSMISSION / TRANSAXLE on 2008 Toyota Land Cruiser?

  A: The first installation step for the Park/Neutral Position Switch Assembly for the AB60F AUTOMATIC TRANSMISSION / TRANSAXLE requires attachment to the manual valve shaft followed by a temporary bolt installation. The installation requires a new lock washer together with a nut that needs tightening to 6.9 Nm torque (70 kgf-cm) and 61 in-lbf force. The control shaft lever RH should be installed temporarily until it stops counterclockwise followed by a 2-notch clockwise motion for the N position before taking out the lever. Insert the bolt attaching the switch and position it according to the neutral basic line. Then securely tighten the bolt to 13 Nm (133 kgf-cm, 10 ft-lbf). The screwdriver helps bend the lock washer tabs before installing the transmission control rod bush and collar to the transmission control shaft lever RH and mounting the transmission control shaft lever RH with spring washer and nut application of 16 Nm (163 kgf-cm, 12 ft-lbf) torque. Use the switch connector and attach the shifting rod to the transmission control shaft lever RH via its pin while installing a new clip. Connect the cable to the negative battery terminal before reviewing the shift lever position while checking the Park/Neutral Position Switch Assembly.