OEM 2009 Toyota Land Cruiser Neutral Safety Switch

2009 Toyota Land Cruiser Parts Questions & Experts Answers

• Q: How to install the Park/Neutral Safety Switch Assembly for the AB60F Automatic Transmission/Transaxle on 2009 Toyota Land Cruiser?

  A: The first step to install the Park/Neutral Position Switch Assembly onto the AB60F Automatic Transmission/Transaxle requires attachment of the switch to the manual valve shaft and the installation of a temporary bolt. Following that, add a new lock washer combined with a new nut before tightening it to 6.9 Nm (70 kgf-cm, 61 in-lbf). Safely install the control shaft lever right-hand side by rotating it first counter-clockwise until it stops then clockwise two stops until it settles into the N position before removing it. Follow the neutral basic line while keeping the switch in position to tighten the bolt to 13 Nm (133 kgf-cm, 10 ft-lbf). To install the transmission control rod bush with collar onto the transmission control shaft lever RH, first bend the tabs of the lock washer with a screwdriver. Connect the transmission control shaft lever RH with the spring washer and nut while tapering the torque to 16 Nm (163 kgf-cm, 12 ft-lbf) then link the switch connector. Attach the shifting rod to the transmission control shaft lever RH through its pin and mount a brand-new clip. Last among the steps is connecting the cable to the negative battery terminal and checking the shift lever position as well as inspecting the Park/Neutral Position Switch Assembly.