OEM 2008 Toyota Land Cruiser Clock Spring

2008 Toyota Land Cruiser Clock Spring Parts Q&A

• Q: How to remove the Clock Spring Assembly / Spiral Cable on 2008 Toyota Land Cruiser?

  A: The removal process for Clock Spring Assembly / Clock Spring begins with disconnecting vehicle power then waiting at least 90 seconds to deactivate the SRS system. Store the front wheels in a direct forward position. The service procedure starts with taking off lower No. 3 steering wheel cover after which comes lower No. 2 steering wheel cover followed by steering pad removal. Start by removing the steering wheel assembly from its position before uninstalling both the lower steering column cover together with the upper steering column cover. Before removing the clock spring disconnect filters from the clock spring with steering sensor while ensuring protection of the Air Bag wire harness. You must detach three claws to take off the clock spring with steering sensor before you can detach six claws for removing the clock spring from the steering sensor.