OEM 2008 Toyota Land Cruiser Fuel Door Release Cable

2008 Toyota Land Cruiser Parts Questions & Experts Answers

• Q: How to install the Fuel Door Release Cable Assembly and other components on 2008 Toyota Land Cruiser?

  A: The installation begins by attaching clamps according to the provided illustration. Connect the Fuel Filler Opening Lid Lock Retainer by rotating it clockwise then install the cable in an identical fashion. The second step involves coupling the fuel lid lock control cable to the fuel lid lock open lever before securing the lever with its 2 claws. You should start with the No. 1 Woofer Box Speaker Assembly followed by the Front Quarter Trim Panel Assembly RH while continuing with the Rear Seat Cover Cap along with the No. 1 Luggage Compartment Trim Hook followed by the Rear Floor Mat Rear Support Plate then finishing with the Front Floor Carpet Assembly. The installation of the Rear Console Box Sub-Assembly requires a Cool Box only when the Cool Box is needed. Moved on to fit the Rear No. 2 Seat Protector, Rear No. 1 Seat Protector and Air Duct Guide, Air Duct Plug, Air Heater Guide, and No. 2 Air Duct Plug. Attach the vehicle with Rear Door Scuff Plates LH and RH, the Rear Step Cover, the Cowl Side Trim Boards LH and RH, Front Door Scuff Plates LH and RH, and the Instrument Side Panels LH and RH. The installation requires the Rear No. 1 Seat Assembly RH followed by Rear No. 3 Seat Cushion Hinge Cover and continued with Rear No. 1 Seat Cushion Hinge Cover and Rear No. 4 Seat Cushion Hinge Cover. The sequence includes Rear No. 2 Seat Cushion Hinge Cover before Rear No. 1 Seat Assembly LH, Rear No. 4 Seat Cushion Hinge Cover, Rear No. 2 Seat Cushion Hinge Cover, Rear No. 5 Seat Cushion Hinge Cover, and finally Rear No. 3 Seat Cushion Hinge Cover. The last steps include installation of the Rear No. 2 Seat Assembly RH followed by Front Seat Assembly RH and Front Seat Assembly LH while connecting the cable to the negative battery terminal.