How to remove the Crankshaft Position Sensor on 2008 Toyota Avalon?

The initial task for removing the Crankshaft Position Sensor from the 2GR-FE engine control system begins with disconnecting the negative cable while recognizing that some systems may need setup again after the reconnect. Move on to remove the V-ribbed belt before you take out the generator assembly. After removing the cooler compressor assembly proceed with disconnecting it. The crankshaft position sensor requires its connector to be detached followed by bolt removal to extract the sensor from its position.

OEM 2008 Toyota Avalon Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2008 Toyota Avalon Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Part Name Code: 11101E
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 3
- SKU: 90919-T5005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Base, Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, TRD, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS, XSE, XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Avalon Sensor, Crank Position
Part Number: 90919-A5003
$72.15 MSRP: $101.28
You Save: $29.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05057
- Part Name Code: 11401G
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 2.8 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-A5003
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS | 6 Cyl 3.5 L GAS

2008 Toyota Avalon Crankshaft Position Sensor

Looking for affordable OEM 2008 Toyota Avalon Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Avalon Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Avalon Crankshaft Position Sensor Parts Q&A

Q: How to remove the Crankshaft Position Sensor on 2008 Toyota Avalon?
A: The initial task for removing the Crankshaft Position Sensor from the 2GR-FE engine control system begins with disconnecting the negative cable while recognizing that some systems may need setup again after the reconnect. Move on to remove the V-ribbed belt before you take out the generator assembly. After removing the cooler compressor assembly proceed with disconnecting it. The crankshaft position sensor requires its connector to be detached followed by bolt removal to extract the sensor from its position.