How to remove the ignition switch assembly on 2008 Scion xB?

The 2AZ-FE engine ignition switch removal process starts with turning the front wheels to face forward direction followed by disconnecting the negative battery cable terminal. A minimum 90-second waiting period is required before proceeding to maintain Air Bag and seat belt pretensioner deactivation. Begin by removing the steering pad after which you should remove the steering wheel assembly. To separate the lower side of the steering column cover you should use your fingers to push the right and left sides which disconnects the 4 claws before putting fingers into the tilt lever opening and turning the cover to release the final 2 claws. Ending the steps involves disconnecting two connectors before accessing the wire harness clamp and final removal of the ignition switch assembly through its 2 screws.

OEM 2008 Scion xB Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
2008 Scion xB Position Sensor
Part Number: 84052-71010
$61.21 MSRP: $85.91
You Save: $24.70 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Part Name Code: 84052
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.6 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84052-71010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2008 Scion xB Ignition Switch
Part Number: 84450-12200
$103.17 MSRP: $144.81
You Save: $41.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Ignition Starter Switch
- Part Name Code: 84450
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.4 x 5.8 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84450-12200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2008 Scion xB Ignition Switch

Looking for affordable OEM 2008 Scion xB Ignition Switch? Explore our comprehensive catalogue of genuine 2008 Scion xB Ignition Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xB Parts Questions & Experts Answers

Q: How to remove the ignition switch assembly on 2008 Scion xB?
A: The 2AZ-FE engine ignition switch removal process starts with turning the front wheels to face forward direction followed by disconnecting the negative battery cable terminal. A minimum 90-second waiting period is required before proceeding to maintain Air Bag and seat belt pretensioner deactivation. Begin by removing the steering pad after which you should remove the steering wheel assembly. To separate the lower side of the steering column cover you should use your fingers to push the right and left sides which disconnects the 4 claws before putting fingers into the tilt lever opening and turning the cover to release the final 2 claws. Ending the steps involves disconnecting two connectors before accessing the wire harness clamp and final removal of the ignition switch assembly through its 2 screws.