How to install the ignition switch assembly and related components on Scion xB?

Installation of the ignition switch assembly demands 2 screws to secure the ignition switch assembly, harness the wire harness and install the steering column cover. Adjust the spiral cable then attach the steering wheel and pad. Relate the negative battery terminal to 5.4 Nm and verify the operation of SRS warning light.

How to remove the ignition switch assembly on Scion xB?

The ignition switch assembly of 2AZ-FE engine must be removed, which is achieved by ensuring that the front wheels are straightened, the negative battery terminal is disconnected and allowed to wait 90 seconds. Take out the steering pad, wheel assembly and lower column cover. Lastly, unscrew the ignition switch assembly, and remove the wire harness clamp and disconnect connector to disassemble it.

OEM Scion xB Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Switches found

View related parts
Scion xB Position Sensor
Part Number: 84052-71010
$65.52 MSRP: $91.97
You Save: $26.45 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2015 Scion xB | Base | 4 Cyl 2.4 L GAS
View related parts
Scion xB Ignition Switch
Part Number: 84450-52010
$113.75 MSRP: $159.67
You Save: $45.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Replaces: 84450-BZ040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Scion xB | Base | 4 Cyl 1.5 L GAS
View related parts
Scion xB Ignition Switch
Part Number: 84450-12200
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Ignition Starter Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2015 Scion xB | Base | 4 Cyl 2.4 L GAS
View related parts
Scion xB Warning Switch
Part Number: 84052-32030
$27.35 MSRP: $38.07
You Save: $10.72 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Warning Switch; Ignition Switch; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Scion xB | Base | 4 Cyl 1.5 L GAS

Scion xB Ignition Switch

If you're thinking about purchasing OEM parts for your Scion xB, our website is your one-stop destination. We stock an extensive selection of genuine Scion xB Ignition Switch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion xB Ignition Switch Parts and Q&A

Ignition Switch
84450-12200
Q: How to install the ignition switch assembly and related components on Scion xB?
A: Installation of the ignition switch assembly demands 2 screws to secure the ignition switch assembly, harness the wire harness and install the steering column cover. Adjust the spiral cable then attach the steering wheel and pad. Relate the negative battery terminal to 5.4 Nm and verify the operation of SRS warning light.
Position Sensor
84052-71010
Q: How to remove the ignition switch assembly on Scion xB?
A: The ignition switch assembly of 2AZ-FE engine must be removed, which is achieved by ensuring that the front wheels are straightened, the negative battery terminal is disconnected and allowed to wait 90 seconds. Take out the steering pad, wheel assembly and lower column cover. Lastly, unscrew the ignition switch assembly, and remove the wire harness clamp and disconnect connector to disassemble it.