×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Scion xB Ignition Coil
Ignition Coil Resistor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Ignition Coil found
2008 Scion xB Ignition Coil
Part Number: 90919-02260$79.15 MSRP: $111.09You Save: $31.94 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Coil, Ignition; Direct Ignition Coil; Direct Ignition Coil OE Quality; Ignition Coil Set; Coil; Coil Assembly, Ignition
- Replaces: 90919-T2008, 90919-T2005, 90919-A2001, 90919-A2006, 90919-02248
- Part Name Code: 19500
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.7 x 4.3 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-02260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Scion xB Ignition Coil
Looking for affordable OEM 2008 Scion xB Ignition Coil? Explore our comprehensive catalogue of genuine 2008 Scion xB Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion xB Ignition Coil Parts Q&A
- Q: How to install the ignition coil and spark plugs on 2008 Scion xB?A: You should install 4 spark plugs onto the 2AZ-FE engine where each plug requires 19 Nm (194 kgf-cm, 14 ft-lbf) torque before attaching the 4 ignition coils using 4 bolts tightened to 9.0 Nm (92 kgf-cm, 80 in-lbf). Then connect all 4 ignition coil connectors. 1. Install 4 ignition coils using the provided 4 bolts then tighten them to 9.0 Nm (92 kgf-cm, 80 in-lbf). Finally, connect all 4 ignition coil connectors. Proceed to check the ignition timing after finishing this installation step. Secure the No. 1 engine cover sub-assembly to the engine with 2 nuts that should be tightened to 9.0 Nm (92 kgf-cm, 80 in-lbf).