How to service and repair the rear speed sensor on 2007 Toyota Sienna?

Start the 2WD rear speed sensor service by removing the rear wheel and dividing the skid control sensor wire through connector removal. You should mark drum brake and axle hub points before uninstalling both components but simply detach two rear brake caliper bolts first to reach the rear disc of disc brakes. Secure the rear axle hub to a soft jaw vise then take off both the LH rear speed sensor and axle hub & bearing assembly. Replace the axle hub without delay when you drop or severely shock it. Strike the pins at both attachments with the pin punch and hammer to detach them from Special Service Tool. Use the tools 09520-00031 or 09520-00040, 09521-00020, 09950-00020 with two bolts (12mm bolt, 1.5mm pitch size) to detach the skid control sensor from the axle hub. Substitute the hub assembly when sensor rotor damage occurs and prevent damage to contact surfaces. Start by cleaning the surfaces of the axle hub and the new sensor. Then place the sensor on the hub connector. To install the sensor using Special Service Tool: 09214-76011, apply gentle slow pressure to the press without striking the sensor. Reassemble the left rear hub and bearing unit then reinstall the brake component using accurate matchmarks as installation reference. Put two bolts into the rear disc brake caliper assembly LH before connecting the skid control sensor wire and placing the rear wheel back. Then test the ABS speed sensor signal after aligning the rear wheel when needed.

OEM 2007 Toyota Sienna Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Speed Sensors found

View related parts
2007 Toyota Sienna ABS Sensor, Rear
Part Number: 89544-02020
$222.39 MSRP: $272.73
You Save: $50.34 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Ring; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.2 x 2.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-02020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Sienna Front Speed Sensor, Driver Side
Part Number: 89543-08030
$279.82 MSRP: $399.52
You Save: $119.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.2 x 6.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Sienna Rear Speed Sensor, Driver Side
Part Number: 89546-08010
$283.20 MSRP: $404.35
You Save: $121.15 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Left-Hand; ABS Wheel Speed Sensor; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89546
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.4 x 5.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89546-08010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Sienna Rear Speed Sensor, Passenger Side
Part Number: 89545-08010
$283.20 MSRP: $404.35
You Save: $121.15 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Right-Hand; ABS Wheel Speed Sensor; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89545
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.1 x 5.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89545-08010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Sienna Front Speed Sensor, Passenger Side
Part Number: 89542-08030
$279.82 MSRP: $399.52
You Save: $119.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 1.10 Pounds
- Item Dimensions: 10.3 x 6.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2007 Toyota Sienna Speed Sensor

Looking for affordable OEM 2007 Toyota Sienna Speed Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Sienna Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Sienna Speed Sensor Parts Q&A

Q: How to service and repair the rear speed sensor on 2007 Toyota Sienna?
A: Start the 2WD rear speed sensor service by removing the rear wheel and dividing the skid control sensor wire through connector removal. You should mark drum brake and axle hub points before uninstalling both components but simply detach two rear brake caliper bolts first to reach the rear disc of disc brakes. Secure the rear axle hub to a soft jaw vise then take off both the LH rear speed sensor and axle hub & bearing assembly. Replace the axle hub without delay when you drop or severely shock it. Strike the pins at both attachments with the pin punch and hammer to detach them from Special Service Tool. Use the tools 09520-00031 or 09520-00040, 09521-00020, 09950-00020 with two bolts (12mm bolt, 1.5mm pitch size) to detach the skid control sensor from the axle hub. Substitute the hub assembly when sensor rotor damage occurs and prevent damage to contact surfaces. Start by cleaning the surfaces of the axle hub and the new sensor. Then place the sensor on the hub connector. To install the sensor using Special Service Tool: 09214-76011, apply gentle slow pressure to the press without striking the sensor. Reassemble the left rear hub and bearing unit then reinstall the brake component using accurate matchmarks as installation reference. Put two bolts into the rear disc brake caliper assembly LH before connecting the skid control sensor wire and placing the rear wheel back. Then test the ABS speed sensor signal after aligning the rear wheel when needed.