Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; ABS Sensor; Front Speed Sensor; Sensor, Speed, Front Passenger Side
Position: Front Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1998-2000 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.0 L GAS
Toyota Sienna Speed Sensor
Choose genuine Speed Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Speed Sensor for your Toyota Sienna? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sienna parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.
Q: How to install the U151f automatic transaxle speed sensor on Toyota Sienna?
A:
The U151F automatic transaxle speed sensor installation requires atf immersion of the o-ring before mounting the nc sensor with proper torque of 11 Nm (115 kgf-cm, 8ft-lbf) using the manufacturer's sensor from the same production source. The speed sensor connector should be connected as the next step. The nt sensor installation requires the same atf coating on its o-ring followed by installing the bolt at 11 Nm (115 kgf-cm, 8ft-lbf). Successively install first the air cleaner assembly followed by the battery after the speed sensors have been correctly mounted.
Q: How to remove the transmission speed sensor from the U151F automatic transaxle on Toyota Sienna?
A:
Uninstall the U151F automatic transaxle transmission speed sensor by starting with battery removal. The air cleaner assembly should be removed after you pull out the assembly. You must disconnect the speed sensor connector when working on the NT sensor before removing the bolt and speed sensor itself. Connectors need disconnection from the NC sensor before removing the bolt and speed sensor.