How to service and repair the rear Sway Bar Kit on 2007 Toyota Sequoia?

You should start sway bar kit servicing or repairs by uninstalling the rear wheel after tightening it to a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.). Position a jack to support the rear axle housing before removing the front and rear sway bar link by taking out the two nuts and link along with their respective torque setting to 69 Nm (704 kgf-cm, 51 ft. lbs.); apply a hexagon wrench on the ball joint stud if it rotates with the nut before repeating these steps on the second side. After separating the 4 bolts which hold together the sway bar kit with its bushings and brackets, apply 37 Nm (377 kgf-cm, 27 ft. lbs.) torque before detaching the sway bar kit from the two brackets and two bushings. To inspect the ball joint stud you must rotate it in various directions as any movement except smooth and unhindered operation should result in new sway bar link installation. The installation procedure will reverse the process of removal.

OEM 2007 Toyota Sequoia Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2007 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-AF030
$151.68 MSRP: $214.72
You Save: $63.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Manufacturer Note: W(REAR STABILIZER)
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.8 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AF030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2007 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-AF040
$146.28 MSRP: $207.08
You Save: $60.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Manufacturer Note: W(AIR SUSPENSION)
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.4 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AF040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2007 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-AF020
$128.06 MSRP: $181.29
You Save: $53.23 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 41.6 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AF020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2007 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-AF010
$119.02 MSRP: $168.49
You Save: $49.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: W(SUN ROOF)
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.10 Pounds
- Item Dimensions: 42.0 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AF010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2007 Toyota Sequoia Sway Bar Kit

Looking for affordable OEM 2007 Toyota Sequoia Sway Bar Kit? Explore our comprehensive catalogue of genuine 2007 Toyota Sequoia Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service and repair the rear Sway Bar Kit on 2007 Toyota Sequoia?
A: You should start sway bar kit servicing or repairs by uninstalling the rear wheel after tightening it to a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.). Position a jack to support the rear axle housing before removing the front and rear sway bar link by taking out the two nuts and link along with their respective torque setting to 69 Nm (704 kgf-cm, 51 ft. lbs.); apply a hexagon wrench on the ball joint stud if it rotates with the nut before repeating these steps on the second side. After separating the 4 bolts which hold together the sway bar kit with its bushings and brackets, apply 37 Nm (377 kgf-cm, 27 ft. lbs.) torque before detaching the sway bar kit from the two brackets and two bushings. To inspect the ball joint stud you must rotate it in various directions as any movement except smooth and unhindered operation should result in new sway bar link installation. The installation procedure will reverse the process of removal.