How to remove the rear Sway Bar Kit on 2008 Toyota Sequoia?

The first step for rear sway bar kit removal involves taking out the exhaust pipe assembly tail from the 3UR-FE or 2UZ-FE generation. The removal procedure for 2WD vehicles includes separation of the propeller shaft assembly while 4WD vehicles need the extraction of the propeller shaft heat insulator followed by the transfer heat insulator before completing the propeller shaft assembly removal. Use a hexagon wrench to hold the stud when the ball joint turns with the nut before removing the 2 nuts from the rear sway bar link assembly LH. Repetition of this method should be performed on the rear sway bar link assembly RH assembly process. The next step requires you to remove the rear sway bar bracket through the removal of its 4 bolts and 2 brackets. End the process by removing the rear sway bar kit from the vehicle before disconnecting its two bushes.

OEM 2008 Toyota Sequoia Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Kits found

View related parts
2008 Toyota Sequoia Stabilizer Bar, Front
Part Number: 48811-0C030
$147.10 MSRP: $208.24
You Save: $61.14 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: TRD SPORT PACKAGE
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.70 Pounds
- Item Dimensions: 44.2 x 12.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-0C030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Stabilizer Bar, Rear
Part Number: 48812-0C020
$92.66 MSRP: $130.05
You Save: $37.39 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: TRD SPORT PACKAGE
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.00 Pounds
- Item Dimensions: 41.1 x 9.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Sway Bar Kit

Looking for affordable OEM 2008 Toyota Sequoia Sway Bar Kit? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Sway Bar Kit Parts Q&A

Q: How to remove the rear Sway Bar Kit on 2008 Toyota Sequoia?
A: The first step for rear sway bar kit removal involves taking out the exhaust pipe assembly tail from the 3UR-FE or 2UZ-FE generation. The removal procedure for 2WD vehicles includes separation of the propeller shaft assembly while 4WD vehicles need the extraction of the propeller shaft heat insulator followed by the transfer heat insulator before completing the propeller shaft assembly removal. Use a hexagon wrench to hold the stud when the ball joint turns with the nut before removing the 2 nuts from the rear sway bar link assembly LH. Repetition of this method should be performed on the rear sway bar link assembly RH assembly process. The next step requires you to remove the rear sway bar bracket through the removal of its 4 bolts and 2 brackets. End the process by removing the rear sway bar kit from the vehicle before disconnecting its two bushes.