How to reassemble the front shock absorber on 2008 Toyota Sequoia?

Install the front coil spring LH using Special Service Tool 09727-30021 by compressing it while being cautious not to exceed the necessary extent and refrain from using an impact wrench to safeguard the tool against damage. Begin with placing the coil spring onto the shock absorber so its lower end enters the spring seat receptacle. The front suspension support sub-assembly LH requires 2 cushions along with 2 retainers and the piston rod without AVS or 2 cushions and 2 retainers next to a collar for the suspension support with AVS. Add a temporary suspension support to the front shock absorber nut while maintaining its correct orientation as shown in the illustration and then remove the Special Service Tool while ensuring not to employ an impact wrench to protect the shock absorber rod from damage. Use a torque wrench to fasten the front support at the front shock absorber nut until it reaches 25 Nm (255 kgf-cm, 18 ft-lbf).

OEM 2008 Toyota Sequoia Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Shock Absorbers found

View related parts
2008 Toyota Sequoia Shock Absorber
Part Number: 48510-09S71
$124.19 MSRP: $175.80
You Save: $51.61 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Strut Kit; Strut Shock Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Replaces: 48510-09S70
- Item Weight: 7.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09S71
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Shock Absorber, Rear
Part Number: 48530-34053
$543.15 MSRP: $795.99
You Save: $252.84 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-34053
- Position: Rear
- Replaces: 48530-34051
- Item Weight: 11.10 Pounds
- Item Dimensions: 24.5 x 6.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-34053
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Platinum | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Shock Absorber
Part Number: 48530-0C101
$44.80 MSRP: $62.36
You Save: $17.56 (29%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Shock Absorber; Suspension Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Replaces: 48530-0C100
- Item Weight: 3.80 Pounds
- Item Dimensions: 25.5 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-0C101
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Shock Absorber
Part Number: 48510-09S61
$124.19 MSRP: $175.80
You Save: $51.61 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Strut Kit; Strut Shock Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Replaces: 48510-09S60
- Item Weight: 7.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09S61
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Shock Absorber
Part Number: 48510-34010
$187.44 MSRP: $267.62
You Save: $80.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Shock Absorber, Front; Suspension Shock Absorber; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-34010
- Item Weight: 9.90 Pounds
- Item Dimensions: 26.1 x 8.6 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Shock Absorber

Looking for affordable OEM 2008 Toyota Sequoia Shock Absorber? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Parts Questions & Experts Answers

Q: How to reassemble the front shock absorber on 2008 Toyota Sequoia?
A: Install the front coil spring LH using Special Service Tool 09727-30021 by compressing it while being cautious not to exceed the necessary extent and refrain from using an impact wrench to safeguard the tool against damage. Begin with placing the coil spring onto the shock absorber so its lower end enters the spring seat receptacle. The front suspension support sub-assembly LH requires 2 cushions along with 2 retainers and the piston rod without AVS or 2 cushions and 2 retainers next to a collar for the suspension support with AVS. Add a temporary suspension support to the front shock absorber nut while maintaining its correct orientation as shown in the illustration and then remove the Special Service Tool while ensuring not to employ an impact wrench to protect the shock absorber rod from damage. Use a torque wrench to fasten the front support at the front shock absorber nut until it reaches 25 Nm (255 kgf-cm, 18 ft-lbf).