Other Name: Absorber Assembly, Shock; Shock Absorber, Front; Suspension Shock Absorber; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
Manufacturer Note: MARK 48510-34010
Item Weight: 9.90 Pounds
Item Dimensions: 26.1 x 8.6 x 7.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48510-34010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2009 Toyota Sequoia Shock Absorber
Looking for affordable OEM 2009 Toyota Sequoia Shock Absorber? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Sequoia Parts Questions & Experts Answers
Q: How to remove the rear shock absorber on 2009 Toyota Sequoia?
A: The first step to take off the rear shock absorber requires you to remove the rear wheel. Willing drivers must extract the tail exhaust pipe assembly for the 3UR-FE engine while performing the same process for the 2UZ-FE engine. To remove the propeller shaft assembly from 2WD models perform this procedure while 4WD models first require the heat insulators removal before completing the propeller shaft assembly removal. Both the rear height control sensor sub-assembly LH and the rear stabilizer bar need to be removed before proceeding. End the procedure by removing the rear shock absorber assembly LH through disconnecting its AVS connector when applicable and removing two bolts and their nut.