How to service and repair the rear trailing arm on 2007 Toyota RAV4?

The servicing process of the rear trailing arm starts by removing the rear wheel and disconnecting the No. 2 parking brake cable assembly. The rear trailing arm assembly removal on the LH side includes uninstalling the 3 assembly bolts together with the nut and trailing arm from the axle carrier and suspension arm bracket with careful fixation of the nut when unscrewing the bolt. During installation of the rear trailing arm assembly use the three bolts and nut to attach it to the axle carrier and suspension arm bracket before fixing the nut and continuing bolt tightening. The rear wheel along with the No. 2 parking brake cable assembly needs installation while maintaining 103 Nm (1,050 kgf-cm, 76 ft. lbs.) torque. Tighten the rear trailing arm assembly LH through securing its 3 bolts and suspension arm bracket nut where a torque of 200 Nm (148 ft. lbs., 2,039 kgf-cm) is required before final rear wheel alignment checks.

OEM 2007 Toyota RAV4 Trailing Arm

Trailing Control Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Trailing Arms found

View related parts
2007 Toyota RAV4 Trailing Arm, Rear Passenger Side
Part Number: 48760-42010
$162.54 MSRP: $230.08
You Save: $67.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Trailing; Suspension Trailing Arm, Rear Right; Suspension Control Arm, Rear Right; Arm Assembly, Trailing, Rear Passenger Side; Arm Assembly, Trailing, Rear; Suspension Trailing Arm
- Manufacturer Note: RH
- Position: Rear Passenger Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 2.4 x 2.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48760-42010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota RAV4 Trailing Arm, Rear Driver Side
Part Number: 48780-42010
$162.54 MSRP: $230.08
You Save: $67.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Trailing; Suspension Trailing Arm, Rear Left; Suspension Control Arm, Rear Left; Arm Assembly, Trailing, Rear Driver Side; Arm Assembly, Trailing, Rear; Suspension Trailing Arm
- Manufacturer Note: LH
- Position: Rear Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 2.1 x 1.8 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48780-42010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2007 Toyota RAV4 Trailing Arm

Looking for affordable OEM 2007 Toyota RAV4 Trailing Arm? Explore our comprehensive catalogue of genuine 2007 Toyota RAV4 Trailing Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota RAV4 Parts Questions & Experts Answers

Q: How to service and repair the rear trailing arm on 2007 Toyota RAV4?
A: The servicing process of the rear trailing arm starts by removing the rear wheel and disconnecting the No. 2 parking brake cable assembly. The rear trailing arm assembly removal on the LH side includes uninstalling the 3 assembly bolts together with the nut and trailing arm from the axle carrier and suspension arm bracket with careful fixation of the nut when unscrewing the bolt. During installation of the rear trailing arm assembly use the three bolts and nut to attach it to the axle carrier and suspension arm bracket before fixing the nut and continuing bolt tightening. The rear wheel along with the No. 2 parking brake cable assembly needs installation while maintaining 103 Nm (1,050 kgf-cm, 76 ft. lbs.) torque. Tighten the rear trailing arm assembly LH through securing its 3 bolts and suspension arm bracket nut where a torque of 200 Nm (148 ft. lbs., 2,039 kgf-cm) is required before final rear wheel alignment checks.