Other Name: Arm Assembly, Trailing; Suspension Trailing Arm, Rear Right; Suspension Control Arm, Rear Right; Arm Assembly, Trailing, Rear Passenger Side; Arm Assembly, Trailing, Rear; Suspension Trailing Arm
Manufacturer Note: RH
Position: Rear Passenger Side
Item Weight: 1.10 Pounds
Item Dimensions: 2.4 x 2.0 x 2.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48760-42010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota RAV4 Submodels:
Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Arm Assembly, Trailing; Suspension Trailing Arm, Rear Left; Suspension Control Arm, Rear Left; Arm Assembly, Trailing, Rear Driver Side; Arm Assembly, Trailing, Rear; Suspension Trailing Arm
Manufacturer Note: LH
Position: Rear Driver Side
Item Weight: 0.80 Pounds
Item Dimensions: 2.1 x 1.8 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48780-42010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota RAV4 Submodels:
Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
2006 Toyota RAV4 Trailing Arm
Looking for affordable OEM 2006 Toyota RAV4 Trailing Arm? Explore our comprehensive catalogue of genuine 2006 Toyota RAV4 Trailing Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota RAV4 Trailing Arm Parts Q&A
Q: How to service and repair the rear trailing arm on 2006 Toyota RAV4?
A: The service and repair of rear trailing arms starts with removing the rear wheel then detaching the No. 2 parking brake cable assembly. The first step entails removing the LH rear trailing arm assembly by disconnecting its 3 bolts and nut combined with trailing arm installation from the axle carrier and suspension arm bracket while actively fixing the nut position before removing the bolt. Installation of the rear trailing arm assembly LH requires users to install the trailing arm with 3 bolts and the nut to the axle carrier and suspension arm bracket then fix the nut while tightening the bolt. The next installation step requires fitting the No. 2 parking brake cable along with the rear wheel but with a torque setting of 103 Nm (1,050 kgf-cm, 76 ft. lbs.). The very end procedure involves tightening the rear trailing arm assembly LH by applying 200 Nm (2,039 kgf-cm, 148 ft. lbs.) torque to its suspension arm bracket bolts and closing the nut and doing a rear wheel alignment check if required.